Solved

New Router trouble accessing Google links

Posted on 2010-09-09
3
1,818 Views
Last Modified: 2012-05-10
I'm putting a new router into place and connectivity is established with the Internet.  I have applied the Cisco Lockdown Step and the Advanced Firewall with a Medium setting is in place.  Speed is fine, and most sites are fine, however after doing a Google search, the links that are provided to me do nothing and I get an error like below.

I wonder what is going on that Google is, or how they are doing it that is prompting this message.  Other Bing and Yahoo searches seem to work fine.  Can I, should I do away with it?

000938: Sep  2 15:41:37.586 PCTime: %APPFW-4-HTTP_DEOBFUSCATION: Deobfuscation signature (15) detected - resetting session 209.183.x.x:2012 72.x.x.99:80 on zone-pair ccp-zp-in-out class ccp-protocol-http appl-class ccp-http-blockparam
0
Comment
Question by:Lenard56
3 Comments
 
LVL 28

Accepted Solution

by:
bgoering earned 250 total points
ID: 33643522
Google does obfuscate the links so when you click on one it looks something like:

http://www.google.com/sa=t&source=web&cd=6&ved=0CCUQFjAF&url=http%3A%2F%2Fcisco.biz%2Fen%2FUS%2Fdocs%2Fios%2F15_0%2Fsystem%2Fmessages%2Fsm_ht01.pdf&ei=26eJTLPRNo3A8wSH4LWfBg&usg=AFQjCNFxqWXjRblV31bUr-KdnD9gGBiqYA

Now when clicking on a google link it takes you back to google that then redirects you to where you want to go. Not sure when they started doing that - a month or two ago. Guess they wanted to track who is clicking on their links and where they are going.

Anyway - your Router isn't liking that. You inidcated this was a new router, once you update all of your signatures on the router I expect it will like it a bit better and Google will work once again.

Good Luck
0
 

Author Closing Comment

by:Lenard56
ID: 33695680
Thanks, it's more of a firewall setting near as i can figure out.  Thanks for the information , it was helpful.
0
 

Expert Comment

by:herbie66b
ID: 37527962
Hi,
I had exactly the same problem with a Cisco 1921 running IOS 15 and with an HWIC-1VDSL modem.
I finally installed the "classic firewall" to get it to work. All other search engines worked perfectly.
I'm sure the Zone firewall could work with the correct configuration.
0

Featured Post

Windows Server 2016: All you need to know

Learn about Hyper-V features that increase functionality and usability of Microsoft Windows Server 2016. Also, throughout this eBook, you’ll find some basic PowerShell examples that will help you leverage the scripts in your environments!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Cisco ISE or Windows NPS for RADIUS and 802.1x 2 54
cisco asa proxy arp 2 18
Public DNS  Vs BGP 20 28
2960 port config for both PC & SIP phone using QoS 2 21
This article will cover setting up redundant ISPs for outbound connectivity on an ASA 5510 (although the same should work on the 5520s and up as well).  It’s important to note that this covers outbound connectivity only.  The ASA does not have built…
How to set-up an On Demand, IPSec, Site to SIte, VPN from a Draytek Vigor Router to a Cyberoam UTM Appliance. A concise guide to the settings required on both devices
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
As a trusted technology advisor to your customers you are likely getting the daily question of, ‘should I put this in the cloud?’ As customer demands for cloud services increases, companies will see a shift from traditional buying patterns to new…

820 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question