Solved

Cisco Catalyst 2950 Switch

Posted on 2010-09-09
6
309 Views
Last Modified: 2012-05-10
I am trying to upgrade the IOS.

I erased the flash. It will not let me load the new flash.

I get a "not enough memory" error code.

I have 7 MB of space and a 2 MB upgrade.

Please advise.
0
Comment
Question by:seramai
  • 3
  • 3
6 Comments
 
LVL 50

Accepted Solution

by:
Don Johnston earned 500 total points
ID: 33636979
What version IOS are you trying to load?

How much Flash and RAM do you have?
0
 

Author Comment

by:seramai
ID: 33637231
I have 7MB of space on the flash card.
The new version is 2MB gi9ve or take.

c2950i6q4l2mz_12114_EA1a_bin
is the name of the file
0
 
LVL 50

Assisted Solution

by:Don Johnston
Don Johnston earned 500 total points
ID: 33637390
According to the Cisco Feature Navigator, that IOS image requires 8MB flash and 16MB RAM.

FN.jpg
0
PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

 

Author Comment

by:seramai
ID: 33638621
I am in switch mode on the switch

switch:

How do I tftp the image from here. I know how to do it with ROM Monitor on the routers, but am not sure how to do it on the switch.
0
 
LVL 50

Expert Comment

by:Don Johnston
ID: 33639586
0
 

Author Closing Comment

by:seramai
ID: 33640752
No additional comments.
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Edgemax OS VPN, to Barracuda Link Balancer 7 169
SSL RA VPN 7 109
Command "logging persistent size .... " 6 56
Choice of router 8 21
While it is possible to put two routes in place with the secondary having a higher metric, this may not always work. In the event of a failure that does not bring down the physical interface on the router the primary route is not removed. There is a…
In this tutorial I will show you with short command examples how to obtain a packet footprint of all traffic flowing thru your Juniper device running ScreenOS. I do not know the exact firmware requirement, but I think the fprofile command is availab…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

813 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

16 Experts available now in Live!

Get 1:1 Help Now