Solved

Trying to join a server 2008 to a SBS 2008

Posted on 2010-09-10
16
517 Views
Last Modified: 2013-11-06
Hey there, I have a server 2008 box with 2 hyper V sessions, one is SBS 2008 which is setup, and the other is a server 2008

I have set the primary DNS on the hyperv 2008 to the SBS 2008 IP.

I am trying to join the server 2008 hyper V to the SBS 2008 domain as a member server.  The hyperV 2008 fails out trying to join the sbs2008.

Here is the part of the error that sticks out

THe DNS servers used by this computer for name resolution are not responding.  This computer is configured to use DNS servers with the following IP address

192.168.1.7 (which is the SBS 2008 IP and is pingable)

THoughts
0
Comment
Question by:bcameron70
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 8
  • 4
  • 2
  • +2
16 Comments
 
LVL 5

Accepted Solution

by:
adaroc earned 0 total points
ID: 33648257
hi,

verify that :

  1. DNS server service is running on the SBS2008 machine.
  2. when entering the domain leave ".local" out
post back results pls
0
 
LVL 59

Expert Comment

by:Darius Ghassem
ID: 33648580
Can you ping the domain name?
0
 
LVL 3

Expert Comment

by:jensskov
ID: 33648613
Can you do a "nslookup domain.locaæ' substituting domain.local with your own.
0
Forrester Webinar: xMatters Delivers 261% ROI

Guest speaker Dean Davison, Forrester Principal Consultant, explains how a Fortune 500 communication company using xMatters found these results: Achieved a 261% ROI, Experienced $753,280 in net present value benefits over 3 years and Reduced MTTR by 91% for tier 1 incidents.

 

Author Comment

by:bcameron70
ID: 33649596
Im back in, as soon as the restarts are done I will try without the .local
Than I'll try the DNS service on the 2008


0
 

Author Comment

by:bcameron70
ID: 33649617
OK did both of thos,

COmputer name/domain changes
the following error occurred attempting to join the domain "***"
an attempt to resolve the DNS name of a DC in the domain being joined has failed.  Please verify this client is configured to reach a DNS server that can resolve DNS names in the target domain

The funny thing is that I got the username and password box this time.  Seems to be a permission blocking somewhere?  Did they do something funny with 2008 DNS services not allowing foreigners to ask for directions?
0
 

Author Comment

by:bcameron70
ID: 33649629
nslookup yielded DNS request timed out
0
 

Author Comment

by:bcameron70
ID: 33649644
I can ping the SBS ip though
0
 
LVL 59

Expert Comment

by:Darius Ghassem
ID: 33649722
Can you ping domain name?
0
 

Author Comment

by:bcameron70
ID: 33649756
I can ping the server name, it returns the ipv6 address though
0
 
LVL 5

Expert Comment

by:adaroc
ID: 33649973
hi

hmm remove bindings to ip6 address on sbs2008 server

post back results



0
 
LVL 59

Expert Comment

by:Darius Ghassem
ID: 33650020
Post ipconfig /all
0
 

Author Comment

by:bcameron70
ID: 33650153
ipconfig /all sbs2008 hyperV
Windows IP Configuration

   Host Name . . . . . . . . . . . . : RFBSERVER
   Primary Dns Suffix  . . . . . . . : rfb.local
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : No
   WINS Proxy Enabled. . . . . . . . : No
   DNS Suffix Search List. . . . . . : rfb.local

Ethernet adapter Local Area Connection:

   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : Microsoft Virtual Machine Bus Network
pter
   Physical Address. . . . . . . . . : 00-15-5D-01-0A-01
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
   Link-local IPv6 Address . . . . . : fe80::57fa:b1b5:9ca1:2055%10(Preferred
   Link-local IPv6 Address . . . . . : fe80::c964:b229:b5b7:551c%10(Preferred
   IPv4 Address. . . . . . . . . . . : 192.168.1.7(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : 192.168.1.1
   DHCPv6 IAID . . . . . . . . . . . : 251663709
   DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-14-1C-06-A7-00-15-5D-01-0A

   DNS Servers . . . . . . . . . . . : fe80::57fa:b1b5:9ca1:2055%10
                                       192.168.1.7
   NetBIOS over Tcpip. . . . . . . . : Enabled

Tunnel adapter Local Area Connection* 8:

   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : isatap.{B8C5B11E-AF0E-492D-8DCA-313803
BB2}
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes

Tunnel adapter Local Area Connection* 9:

   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
   Physical Address. . . . . . . . . : 02-00-54-55-4E-01
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
0
 

Author Comment

by:bcameron70
ID: 33650174
ipconfig /all server 2008 hyperV

Windows IP Configuration

   Host Name . . . . . . . . . . . . : Spider2
   Primary Dns Suffix  . . . . . . . :
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : No
   WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection:

   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : Microsoft Virtual Machine Bus Network Ada
pter
   Physical Address. . . . . . . . . : 00-15-5D-01-0A-02
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
   Link-local IPv6 Address . . . . . : fe80::741f:894a:c326:f1cf%10(Preferred)
   IPv4 Address. . . . . . . . . . . : 192.168.1.8(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : 192.168.1.1
   DHCPv6 IAID . . . . . . . . . . . : 234886493
   DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-14-1C-1B-7B-00-15-5D-01-0A-02

   DNS Servers . . . . . . . . . . . : 192.168.1.7
                                       24.92.226.11
   NetBIOS over Tcpip. . . . . . . . : Enabled

Tunnel adapter Local Area Connection* 8:

   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : isatap.{6EBD1F2E-845A-40B0-8ADC-DEDAF2B57
9F8}
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes

Tunnel adapter Local Area Connection* 9:

   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
   Physical Address. . . . . . . . . : 02-00-54-55-4E-01
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
   IPv6 Address. . . . . . . . . . . : 2001:0:4137:9e76:43f:2133:3f57:fef7(Prefe
rred)
   Link-local IPv6 Address . . . . . : fe80::43f:2133:3f57:fef7%12(Preferred)
   Default Gateway . . . . . . . . . : ::
   NetBIOS over Tcpip. . . . . . . . : Disabled

C:\Users\Administrator>
0
 

Author Comment

by:bcameron70
ID: 33650397
I just got it to work, I went into DNS on the SBS2008 and set security for authenticated users to allow.  Not sure if the user account was hosing things, it was a network admin account, does not make sense...I've done 20+ of these 2003 version, I feel like I am learning all over again with 2008...ugh....thank you!
0
 
LVL 59

Expert Comment

by:Darius Ghassem
ID: 33650498
Remove this IP address from the DNS server list.

24.92.226.11
0
 
LVL 2

Expert Comment

by:michael_hering
ID: 33651929
Hi Adaroc,

I noticed your question this evening and I wanted to comment. I understand that you are attempting to join your Windows Server 2008 Hyper-V host server to the domain that exists on your Microsoft Small Business Server 2008 virtual server, which is running as a guest server.

I would caution you to read this Microsoft TechNet article before moving forward:
"Best Practices for Using Hyper-V with Windows Small Business Server 2008"
http://technet.microsoft.com/en-us/library/dd239199%28WS.10%29.aspx

Reference the section titled:
"Do not join the instance of Windows Server 2008 that is running on the parent partition to the Windows SBS 2008 domain.           "

It is a Microsoft "best-practice" to have the Microsoft Server 2008 Hyper-V host be a member of its own workgroup, or have it be a member of another domain. Either way doesn't necessarily matter, as long as it is not a member of a domain that is a guest OS and is the singular DC in the environment.

I hope this is valuable for your situation.

Cheers!
0

Featured Post

Microsoft Certification Exam 74-409

Veeam® is happy to provide the Microsoft community with a study guide prepared by MVP and MCT, Orin Thomas. This guide will take you through each of the exam objectives, helping you to prepare for and pass the examination.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Server 2012 management. 5 44
How to log the IP address of a failed login attempt 6 82
Multiple Open Excel Spreadsheets 12 60
Exchange 2007 3 52
When working with Microsoft SCVMM (System Center Virtual Machine Manager) in a Hyper-V virtualization environment, we have run across scenarios in which the failed migration of a VM from one host to another may leave the VM in a failed state. Specif…
Introduction In one of my previous articles (http://www.experts-exchange.com/Microsoft/Applications/Virtual_Server/Hyper-V/A_10686-Creating-a-Hyper-V-Cluster-on-Windows-2012.html), I explained how to create a native Windows 2012 Cluster.  The metho…
Email security requires an ever evolving service that stays up to date with counter-evolving threats. The Email Laundry perform Research and Development to ensure their email security service evolves faster than cyber criminals. We apply our Threat…
In an interesting question (https://www.experts-exchange.com/questions/29008360/) here at Experts Exchange, a member asked how to split a single image into multiple images. The primary usage for this is to place many photographs on a flatbed scanner…

733 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question