Solved

How do I connect wan2 of Vigor 2820 to the internet using an ASDL Dlink DSL320T modem.

Posted on 2010-09-11
2
588 Views
Last Modified: 2013-12-14
All of the Vigor wan2 settings seem to require same details as modem uses to connect e.g. username, isp fixed IP etc as in a direct cable connection. Am I missing something?
0
Comment
Question by:sturgerm
2 Comments
 
LVL 2

Expert Comment

by:staplar
Comment Utility
If you are plugging in a live already configured, always on adsl line then the Vigor will do the rest. Make sure that on the Dlink DHCP is turned off.
0
 

Accepted Solution

by:
sturgerm earned 0 total points
Comment Utility
Connection worked by setting the Vigor to use Static or Dynamic IP and to obtain IP automatically, BUT with the DLink DHCP turned ON. It did not work with the DHCP turned off, where on noticing that wan2 reported it was in DHCP client mode, I switched Dlink DHCP on and it connected.
0

Featured Post

Why You Should Analyze Threat Actor TTPs

After years of analyzing threat actor behavior, it’s become clear that at any given time there are specific tactics, techniques, and procedures (TTPs) that are particularly prevalent. By analyzing and understanding these TTPs, you can dramatically enhance your security program.

Join & Write a Comment

Suggested Solutions

Title # Comments Views Activity
netflix buffer issue 8 103
Internet speed test 9 121
TV Stations that offer live streams on the net 6 150
ASA 5505 Slowing Internet 11 120
    Over the past few years, small business and home owners have become so dependent on internet that a need for redundancy has arisen.    What happens when your small business or home / home office loses its internet connection?  The results c…
Cable Modem Provisioning from DPoE compliant server  This Article is to support CMTS administrators to provide an overview of DOCSIS compliance configuration file, and to provision a cable modem located at customer place from a Back office serve…
It is a freely distributed piece of software for such tasks as photo retouching, image composition and image authoring. It works on many operating systems, in many languages.
This video discusses moving either the default database or any database to a new volume.

728 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

10 Experts available now in Live!

Get 1:1 Help Now