?
Solved

Lancom AP: how can I use different WLAN SSIDs in the firewall rules?

Posted on 2010-09-11
1
Medium Priority
?
779 Views
Last Modified: 2012-05-10
Hi,

I use a Lancom l-321agn Access Point in my office. The AP provides two WLAN Networks. The first one is WPA Protected, the second uses 802.1x authentification with (free)Radius. Users of both networks can currently access everything in the network.

Now I want to split the networks a little bit. Users of the second network may still access everything, but the users of the first network may only access the webserver (port 80) of the local server in the network. So I have to differentiate between the WLAN Networks in my firewall rules. How can I do it?
0
Comment
Question by:LL0rd
1 Comment
 
LVL 37

Accepted Solution

by:
ArneLovius earned 2000 total points
ID: 33652924
Link each SSID to its own VLAN, then connect to Lancom to a VLAn capable switch and separate the VLANS feeding the "restricted" SSID/VLAN to a suitable firewall.

You will also need to provide DHCP on the restricted SSID/VLAn this could possibly be provided by the firewall
0

Featured Post

Independent Software Vendors: We Want Your Opinion

We value your feedback.

Take our survey and automatically be enter to win anyone of the following:
Yeti Cooler, Amazon eGift Card, and Movie eGift Card!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

This paper addresses the security of Sennheiser DECT Contact Center and Office (CC&O) headsets. It describes the DECT security chain comprised of “Pairing”, “Per Call Authentication” and “Encryption”, which are all part of the standard DECT protocol.
In this article, WatchGuard's Director of Security Strategy and Research Teri Radichel, takes a look at insider threats, the risk they can pose to your organization, and the best ways to defend against them.
Viewers will learn how to connect to a wireless network using the network security key. They will also learn how to access the IP address and DNS server for connections that must be done manually. After setting up a router, find the network security…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

862 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question