?
Solved

Dell PowerConnect 5012 Continuous Boot

Posted on 2010-09-11
3
Medium Priority
?
1,218 Views
Last Modified: 2012-05-10
Hello Experts,

I have a Dell PowerConnect 5012 that I bought off eBay that is in a continuous boot loop. After connecting the RS-232 port to a COM Port on a PC I was able to remove the password but once it restarted it just goes into a boot loop. Any ideas on how to get to the main menu?

Thanks for any help,

JackW9653
0
Comment
Question by:JackW9653
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 2
3 Comments
 
LVL 15

Accepted Solution

by:
wantabe2 earned 2000 total points
ID: 33655163
this is a power supply issue. swap it out or put a new one in & this will fix your issue
0
 

Author Comment

by:JackW9653
ID: 33655180
Power Supply? Didn't think of that. You've seen this before?
0
 

Author Closing Comment

by:JackW9653
ID: 33655210
Thanks for quick solution.

Jaack
0

Featured Post

Get 15 Days FREE Full-Featured Trial

Benefit from a mission critical IT monitoring with Monitis Premium or get it FREE for your entry level monitoring needs.
-Over 200,000 users
-More than 300,000 websites monitored
-Used in 197 countries
-Recommended by 98% of users

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

This tutorial will go through the steps required to write a script that will back up the configuration settings of a HP-ProCurve switch. You will need to get the following things to follow this tutorial: Telnet Scripting Tool e.g. TST10.exe …
WARNING:   If you follow the instructions here, you will wipe out your VTP and VLAN configurations.  Make sure you have backed up your switch!!! I recently had some issues with a few low-end Cisco routers (RV325) and I opened a case with Cisco TA…
In this brief tutorial Pawel from AdRem Software explains how you can quickly find out which services are running on your network, or what are the IP addresses of servers responsible for each service. Software used is freeware NetCrunch Tools (https…
In this video, Percona Solution Engineer Dimitri Vanoverbeke discusses why you want to use at least three nodes in a database cluster. To discuss how Percona Consulting can help with your design and architecture needs for your database and infras…

801 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question