Solved

Glbp setup

Posted on 2010-09-13
1
457 Views
Last Modified: 2012-05-10
hi
i am trying to understanding how GLBP will be setup.

if i read this article

http://www.itsyourip.com/cisco/how-to-configure-glbp-in-cisco-ios-routers/

2 Cisco router will be connected via a serial interface to track gateway interface

but if read this

http://aconaway.com/2008/03/21/configuring-glbp/

I dont need serial interface..
if i follow the second link with the picture i attacked,
will it work ??

or you need to have serial interface between 2 router to track gateway interface ?

 glbp glbp
0
Comment
Question by:fosiul01
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
1 Comment
 
LVL 10

Accepted Solution

by:
ddiazp earned 500 total points
ID: 33664626
You don't need the routers to be connected directly to track interfaces to lower priorities, GLBP will compare priorities on all routers on the same GLBP group to designate the AVG and AVFs. This conversation will go through the switch like any other traffic (routing protocols, cdp, hsrp, vrrp, etc..)

By default, GLBP uses round robin and you can see the options with the command:

glbp 1 load-balancing ?

You can use:

glbp 1 weighting

to set up maximum values, certain tracking for interfaces (if an interface fails how much weight to reduce, or if another router fails, how much weight to take, there's lower and upper bounds on the weight, etc).. it's a lot of criteria, you might wanna play around with those options a bit

0

Featured Post

Simple, centralized multimedia control

Watch and learn to see how ATEN provided an easy and effective way for three jointly-owned pubs to control the 60 televisions located across their three venues utilizing the ATEN Control System, Modular Matrix Switch and HDBaseT extenders.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

WARNING:   If you follow the instructions here, you will wipe out your VTP and VLAN configurations.  Make sure you have backed up your switch!!! I recently had some issues with a few low-end Cisco routers (RV325) and I opened a case with Cisco TA…
A 2007 NCSA Cyber Security survey revealed that a mere 4% of the population has a full understanding of firewalls. As business owner, you should be part of that 4% that has a full understanding.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

726 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question