Solved

CISCO ASA, CONFIGURING VPN TUNNEL THROUGH CLI

Posted on 2010-09-14
5
775 Views
Last Modified: 2012-05-10
I am setting up multiple VPN's to our remote sites and would just lke some help with the CLI and setting up the cryptomaps.

I have tried with the ASDM but would prefer to use the commands as i believe I have to add the inbound IP's to the access control list.

Help much appreciated. Thanks
0
Comment
Question by:FlyingFortress
  • 2
  • 2
5 Comments
 
LVL 57

Accepted Solution

by:
Pete Long earned 500 total points
ID: 33670102
0
 
LVL 1

Author Closing Comment

by:FlyingFortress
ID: 33670151
Brilliant thanks
0
 
LVL 1

Author Comment

by:FlyingFortress
ID: 33670396
Is this just for VPN access to the ASA i was configuring a LAN to LAN VPN do you have documentation for this? Cheers
0
 
LVL 34

Expert Comment

by:Istvan Kalmar
ID: 33670699
0
 
LVL 57

Expert Comment

by:Pete Long
ID: 33672250
Cheers m8y
0

Featured Post

Why You Should Analyze Threat Actor TTPs

After years of analyzing threat actor behavior, it’s become clear that at any given time there are specific tactics, techniques, and procedures (TTPs) that are particularly prevalent. By analyzing and understanding these TTPs, you can dramatically enhance your security program.

Join & Write a Comment

I found an issue or “bug” in the SonicOS platform (the firmware controlling SonicWALL security appliances) that has to do with renaming Default Service Objects, which then causes a portion of the system to become uncontrollable and unstable. BACK…
Exchange server is not supported in any cloud-hosted platform (other than Azure with Azure Premium Storage).
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

746 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

13 Experts available now in Live!

Get 1:1 Help Now