Solved

I can't ping with FrameRelay!!!

Posted on 2010-09-15
2
571 Views
Last Modified: 2012-05-10
Hello,
I setup a network of 5 routers using GNS3, one of these routers is a Frame Relay Switch, i configured everything but i can't ping, #show frame-relay map doesn't show nothing and when i type #show frame-relay route it shows this :

FrameRelay_Switch#show frame-relay route
Input Intf      Input Dlci      Output Intf     Output Dlci     Status
Serial0/0       102             Serial0/1       103             inactive
Serial0/0       104             Serial0/3       105             inactive
Serial0/0       106             Serial0/2       107             inactive
Serial0/1       100             Serial0/0       101             inactive
Serial0/1       200             Serial0/2       201             inactive
Serial0/1       300             Serial0/3       301             inactive
Serial0/2       114             Serial0/1       115             inactive
Serial0/2       116             Serial0/3       117             inactive
Serial0/2       118             Serial0/0       119             inactive
Serial0/3       108             Serial0/2       109             inactive
Serial0/3       110             Serial0/0       111             inactive
Serial0/3       112             Serial0/1       113             inactive

Well, i have attached my configuration files and the network topology file so you can have a clear idea.

Thank you.
Topology.png
R1.txt
R2.txt
R3.txt
R4.txt
R5.txt
0
Comment
Question by:david875
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
2 Comments
 
LVL 50

Accepted Solution

by:
Don Johnston earned 500 total points
ID: 33681052
Looks like your routes are wrong. Should look like this:

interface Serial0/0
 frame-relay route 102 interface Serial0/1 103
 frame-relay route 106 interface Serial0/2 107
 frame-relay route 104 interface Serial0/3 105
!
interface Serial0/1
 frame-relay route 103 interface Serial0/0 102
 frame-relay route 115 interface Serial0/2 114
 frame-relay route 113 interface Serial0/3 112
!
interface Serial0/2
 frame-relay route 107 interface Serial0/0 106
 frame-relay route 114 interface Serial0/1 115
 frame-relay route 116 interface Serial0/3 117
!
interface Serial0/3
 frame-relay route 105 interface Serial0/0 104
 frame-relay route 112 interface Serial0/1 113
 frame-relay route 117 interface Serial0/2 116

Open in new window

0
 

Author Closing Comment

by:david875
ID: 33681596
Worked like 1+1 = 2 hahaha, i thought i should give each time a different DLCI
0

Featured Post

Free Tool: Subnet Calculator

The subnet calculator helps you design networks by taking an IP address and network mask and returning information such as network, broadcast address, and host range.

One of a set of tools we're offering as a way of saying thank you for being a part of the community.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Line cards, Supervisor, Control plane 7 66
ACL Logging Optimization 7 48
route-map permit with a number 1 66
What is weight in VIP (Vserver) in Netscalar? 2 29
While it is possible to put two routes in place with the secondary having a higher metric, this may not always work. In the event of a failure that does not bring down the physical interface on the router the primary route is not removed. There is a…
Quality of Service (QoS) options are nearly endless when it comes to networks today. This article is merely one example of how it can be handled in a hub-n-spoke design using a 3-tier configuration.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

734 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question