Solved

mstdc can't start on sbs2003 after a system crash

Posted on 2010-09-15
2
1,223 Views
Last Modified: 2012-05-10
I have the issue as follows:
this morning the sbs2003 server was hanged - it was up and responding to PING commands, but irresponsive - even to CTRLALTDEL command.  No access to lnetwork shares. I had to hard reset it. It came up amost OK - it said that it cannot load the administrator profile.
I logged off and on as another administrator, and then again logged off and on as ADMINISTRATOR, this time the profile came up OK.
Now I have everything up and running, but the mstdc cannot start, and whaty I get is:
In system event viewer:
Event Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7024
Date:  9/15/2010
Time:  10:29:40 AM
User:  N/A
Computer: computername
Description:
The Distributed Transaction Coordinator service terminated with service-specific error 3221229584 (0xC0001010).
In Application event viewer:
Event Type: Error
Event Source: MSDTC
Event Category: Tracing Infrastructure
Event ID: 4404
Date:  9/15/2010
Time:  10:29:39 AM
User:  N/A
Computer: computername
Description:
MS DTC Tracing infrastructure : the initialization of the tracing infrastructure failed. Internal Information : msdtc_trace : File: d:\nt\com\complus\dtc\dtc\trace\src\tracelib.cpp, Line: 1115, StartTrace Failed, hr=0x80070005
.
Event Type: Error
Event Source: MSDTC
Event Category: LOG
Event ID: 4163
Date:  9/15/2010
Time:  10:29:39 AM
User:  N/A
Computer: computername
Description:
MS DTC log file not found. After ensuring that all Resource Managers coordinated by MS DTC have no indoubt transactions, please run msdtc -resetlog to create the log file.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Event Type: Error
Event Source: MSDTC
Event Category: TM
Event ID: 4185
Date:  9/15/2010
Time:  10:29:39 AM
User:  N/A
Computer: computername
Description:
MS DTC Transaction Manager start failed. LogInit returned error 0x5.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

Event Type: Error
Event Source: MSDTC
Event Category: Tracing Infrastructure
Event ID: 4407
Date:  9/15/2010
Time:  10:29:39 AM
User:  N/A
Computer: computername
Description:
MS DTC Tracing infrastructure : the attempt to flush the existing trace data failed. Internal Information : msdtc_trace : File: d:\nt\com\complus\dtc\dtc\trace\src\tracelib.cpp, Line: 1704, QueryTrace Failed, hr=0x80071069

Thanks all for help.
0
Comment
Question by:gilsolutions
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
2 Comments
 
LVL 13

Accepted Solution

by:
George Sas earned 500 total points
ID: 33681218
Have you tried what it stands in the event log : msdtc -resetlog

Check this 2 articles :
http://technet.microsoft.com/en-us/library/cc774113%28WS.10%29.aspx
http://technet.microsoft.com/en-us/library/cc774308%28WS.10%29.aspx
0
 

Author Closing Comment

by:gilsolutions
ID: 33689158
msdtc -resetlog worked, thanks
0

Featured Post

Why You Need a DevOps Toolchain

IT needs to deliver services with more agility and velocity. IT must roll out application features and innovations faster to keep up with customer demands, which is where a DevOps toolchain steps in. View the infographic to see why you need a DevOps toolchain.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

I’m often asked about newer and larger USB drives connected to SBS2008 and 2011 failing Windows Server Backup vs the older USB drives not failing. As disk space continues to grow and drive technology change SBS2008 and some SBS2011 end up with the f…
ADCs have gained traction within the last decade, largely due to increased demand for legacy load balancing appliances to handle more advanced application delivery requirements and improve application performance.
There are cases when e.g. an IT administrator wants to have full access and view into selected mailboxes on Exchange server, directly from his own email account in Outlook or Outlook Web Access. This proves useful when for example administrator want…
Do you want to know how to make a graph with Microsoft Access? First, create a query with the data for the chart. Then make a blank form and add a chart control. This video also shows how to change what data is displayed on the graph as well as form…

726 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question