<div>
<div class="content wysiwyg-content">
Can I force a route on a PC using DHCP on an ASA to the same effect as the add route command on a PC?
</div>
</div>


Can I force a route on a PC using DHCP on an ASA to the same effect as the add route command on a PC?

ASA 5505 DHCP

Cisco PIX is a dedicated hardware firewall appliance; the Cisco Adaptive Security Appliance (ASA) is a firewall and anti-malware security appliance that provides unified threat management and protection the PIX does not. Other Cisco devices and systems include routers, switches, storage networking, wireless and the software and hardware for PIX Firewall Manager (PFM), PIX Device Manager (PDM) and Adaptive Security Device Manager (ASDM).

Cisco

The Dynamic Host Configuration Protocol (DHCP) is an auto configuration protocol used on IP networks and an extension of the Bootstrap Protocol. DHCP allows for computers to be configured automatically to communicate with each other over an IP network without the need for manual setup by a network administrator. The implementation of DHCP relies on a DHCP server to hand out network configuration information to DHCP-capable clients that request an IP address (and other information required or useful in communicating with other devices on an IP network). In addition to an IP address, common configuration information served over DHCP includes a default gateway, subnet mask and DNS sever(s).

DHCP

Hardware-based firewalls provide more sophisticated protection for inbound and outbound traffic than the simple Windows software firewall or the basic NAT firewalls found in routers. These devices implement techniques such as stateful packet inspection, deep packet inspection, and content filtering; and may include built-in antivirus and anti-malware protection.