Solved

Windows SBS 2008 Network settings will not stay

Posted on 2010-09-19
4
382 Views
Last Modified: 2012-05-10
I recently migrated from a 2003 SBS to 2008 SBS on different hardware (hence the migration). If i set a static IP it keeps coming back after you go into the network settings back to DHCP but it takes my static IP cause when i go to dos and run ipconfig it has all the settings in there correctly. however if i go to network connections and put the radio dial in to "use the following ip address" and i go out and go back in it is always set back to "obtain ip automatically" i've been struggling with this for 2 weeks now. Maybe someone can shed some light. The main reason I am so concerned about this is because everyone on the network randomly losses connection to the server and i have to reboot them or the server daily.
0
Comment
Question by:pcmedix
  • 2
4 Comments
 
LVL 5

Expert Comment

by:Armenio
ID: 33713850
when setting up or making any changes to sbs use the wizard firstly and always.  run the connect to internet wizard again
0
 
LVL 23

Expert Comment

by:ormerodrutter
ID: 33714596
Maybe you can try to reserve your server ip in DHCP?
0
 
LVL 23

Expert Comment

by:ormerodrutter
ID: 33714601
Sorry click submit too soon.....

It is not the solution but may help temporary giving you a bit of time to find the solution :)
0
 

Accepted Solution

by:
pcmedix earned 0 total points
ID: 33722245
Got on the phone with microsoft and it seemed to be a registry setting that they changed. I believe it was HKLM>System>Current Control Set>Control>Network and the key was Config. that was blown out and it recreated itself and seemed to fix the problem. Thank you for the above answers in trying to assist with the issue.
0

Featured Post

Highfive + Dolby Voice = No More Audio Complaints!

Poor audio quality is one of the top reasons people don’t use video conferencing. Get the crispest, clearest audio powered by Dolby Voice in every meeting. Highfive and Dolby Voice deliver the best video conferencing and audio experience for every meeting and every room.

Join & Write a Comment

Know what services you can and cannot, should and should not combine on your server.
OfficeMate Freezes on login or does not load after login credentials are input.
This tutorial will show how to push an installation of Backup Exec to an additional server in both 2012 and 2014 versions of the software. Click on the Backup Exec button in the upper left corner. From here, select Installation and Licensing, then I…
This tutorial will walk an individual through the steps necessary to enable the VMware\Hyper-V licensed feature of Backup Exec 2012. In addition, how to add a VMware server and configure a backup job. The first step is to acquire the necessary licen…

760 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

22 Experts available now in Live!

Get 1:1 Help Now