Solved

Cisco PIX 506e TFTP config

Posted on 2010-09-20
4
1,378 Views
Last Modified: 2012-05-10
Hi all,

I have a PIX 506e that needs to be replaced, I have used the following command to copy the config to my TFTP server:

#write net 10.0.0.1:pix_506e_20092010

Open in new window


The file writes OK and I can view the config, but when I try to replace that config with one I have on our current PIX that is faulty with the following command:

# copy tftp start
Usage:  copy capture:<capture-name> tftp://<location>/<pathname> [pcap]
        copy http[s]://[<user>:<password>@]<location>[:<port>]/<pathname>
                flash[:[image | pdm]]

Open in new window


Any ideas?


0
Comment
Question by:2Cs
  • 2
4 Comments
 
LVL 6

Expert Comment

by:JJClements
ID: 33715057
Try

copy tftp://ipaddress/filename start
0
 
LVL 5

Author Comment

by:2Cs
ID: 33715116
Hi JJClements,

Nope same message.

Al

0
 
LVL 5

Accepted Solution

by:
2Cs earned 0 total points
ID: 33716223
I have found this command and it appears to do the work on the new PIX just need to test on the old 506e.

Al


#config term

(config)#config net 10.0.0.190:pix

Open in new window

0
 
LVL 3

Expert Comment

by:guitar7man
ID: 33717095
copy tftp flash
0

Featured Post

6 Surprising Benefits of Threat Intelligence

All sorts of threat intelligence is available on the web. Intelligence you can learn from, and use to anticipate and prepare for future attacks.

Join & Write a Comment

Suggested Solutions

Title # Comments Views Activity
VLANs, Cisco Switch, and Ruckus Wireless AP 2 53
Cisco Air AP 6 31
OSPF metric and destination 2 10
EIGRP Bandwidth 2 13
This is about downgrading PIX Version 8.0(4) & ASDM 6.1(5) to PIX 7.2(4) and ASDM 5.2(4) but with only 64MB RAM and 16MB flash. Background: You have a Cisco Pix 515E which was running on PIX 7.2(4) and its supporting ASDM 5.2(4) without any i…
From Cisco ASA version 8.3, the Network Address Translation (NAT) configuration has been completely redesigned and it may be helpful to have the syntax configuration for both at a glance. You may as well want to read official Cisco published AS…
Viewers will learn how to properly install and use Secure Shell (SSH) to work on projects or homework remotely. Download Secure Shell: Follow basic installation instructions: Open Secure Shell and use "Quick Connect" to enter credentials includi…
Here's a very brief overview of the methods PRTG Network Monitor (https://www.paessler.com/prtg) offers for monitoring bandwidth, to help you decide which methods you´d like to investigate in more detail.  The methods are covered in more detail in o…

762 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

20 Experts available now in Live!

Get 1:1 Help Now