[Webinar] Streamline your web hosting managementRegister Today

x
?
Solved

Cisco ASA Remote Access VPN - Granting Access To Site-To-Site Tunnels

Posted on 2010-09-20
1
Medium Priority
?
498 Views
Last Modified: 2012-05-10
Corporate HQ (Cam)
Outside = x.x.x.226
Inside = 192.168.254.0

Remote Site 1 (Pasa)
Outside = x.x.x.34
Inside = 192.168.251.0

Have users connecting via Remote Access VPN Tunnel, want to allow access to peered site-to-site VPN tunnels (with multiple remote/sister sites).

Not sure what is wrong here, configs attached.
Imp-Pasa-FW.Sanitized.txt
Imp-Cam-FW.Sanitized.txt
0
Comment
Question by:Gunter17
1 Comment
 
LVL 6

Accepted Solution

by:
Gunter17 earned 0 total points
ID: 33719763
Opened a Cisco TAC - Pasa FW was missing an access list entry:
access-list outside_cryptomap_1 extended permit ip 192.168.251.0 255.255.255.0 10.168.254.0 255.255.255.0
0

Featured Post

Learn to develop an Android App

Want to increase your earning potential in 2018? Pad your resume with app building experience. Learn how with this hands-on course.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

WARNING:   If you follow the instructions here, you will wipe out your VTP and VLAN configurations.  Make sure you have backed up your switch!!! I recently had some issues with a few low-end Cisco routers (RV325) and I opened a case with Cisco TA…
Considering cloud tradeoffs and determining the right mix for your organization.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
As a trusted technology advisor to your customers you are likely getting the daily question of, ‘should I put this in the cloud?’ As customer demands for cloud services increases, companies will see a shift from traditional buying patterns to new…
Suggested Courses
Course of the Month9 days, 5 hours left to enroll

590 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question