Solved

SET UP SECURITY ON MY CISCO WTR54G WIRELESS ROUTER

Posted on 2010-09-20
4
356 Views
Last Modified: 2012-05-10
I had a 10 digit number to get into my wireless router before now when I try to set it up the laptop's etc trying to access get the message that "the setting on this computer do not match the requirement for the network"

I just put a static IP on my router for my network but that shouldn't effect the wireless router security settings should it??
0
Comment
Question by:Newbie0000
  • 2
  • 2
4 Comments
 
LVL 3

Expert Comment

by:karephre
ID: 33720495
It should have changed your network securities. Are you sure you didn't change them? if you can get into the router just go and reestablish your security setting.
0
 

Author Comment

by:Newbie0000
ID: 33720621
I just put a static ip address in my router, I want to set up security so you need a password to connect to my network. If I leave it open it's fine but as soon as I select WEP or WEPA nobody can get to it because of that error.
0
 
LVL 3

Accepted Solution

by:
karephre earned 500 total points
ID: 33720663
sorry my first comment should have been shouldn't. if you set up any security you will have to go to the systems and reconnect them to the WLAN. if your on AD you can push down a policy to change everyone configuration to the new one .
0
 

Author Comment

by:Newbie0000
ID: 33720804
OK, I had to change the settings on the laptop to see the network, never had to do that before but all is up and running now.

Thanks for all the help
0

Featured Post

IT, Stop Being Called Into Every Meeting

Highfive is so simple that setting up every meeting room takes just minutes and every employee will be able to start or join a call from any room with ease. Never be called into a meeting just to get it started again. This is how video conferencing should work!

Join & Write a Comment

Multi-source agreements are important because they set standards that all manufacturers should follow to ensure that devices are compatible with multiple vendors. The multi-source agreement (MSA) is an agreement that establishes how multiple vendors…
In the world of WAN, QoS is a pretty important topic for most, if not all, networks. Some WAN technologies have QoS mechanisms built in, but others, such as some L2 WAN's, don't have QoS control in the provider cloud.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

746 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

9 Experts available now in Live!

Get 1:1 Help Now