Solved

QoS between ASA 5510 and Cisco 877 and 837

Posted on 2010-09-20
2
311 Views
Last Modified: 2012-05-10
Hi All,

I haveIPsec tunnel up and runing. I ihave installed IP phones and i had some complains about the voice quality etc.

Can anyone help me enabling QoS on my ipsec tunnel ?

Thanks
0
Comment
Question by:aucklandnz
2 Comments
 
LVL 34

Accepted Solution

by:
Istvan Kalmar earned 500 total points
ID: 33722520
Please  refer this page howto:

Router:
http://www.cisco.com/en/US/docs/ios/12_2/qos/configuration/guide/qcfvpn.html

ASA:
http://www.cisco.biz/en/US/docs/security/asa/asa82/configuration/guide/conns_qos.html

You need to pre-classifice the packets!

If you have internet connection between two sites the ISP no able to give guaranteed bandwith for voice packet!

Best regards,
Istvan
0
 
LVL 3

Author Comment

by:aucklandnz
ID: 33835456
thanks
0

Featured Post

Why You Should Analyze Threat Actor TTPs

After years of analyzing threat actor behavior, it’s become clear that at any given time there are specific tactics, techniques, and procedures (TTPs) that are particularly prevalent. By analyzing and understanding these TTPs, you can dramatically enhance your security program.

Join & Write a Comment

Suggested Solutions

This article assumes you have at least one Cisco ASA or PIX configured with working internet and a non-dynamic, public, address on the outside interface. If you need instructions on how to enable your device for internet, or basic configuration info…
This article will cover setting up redundant ISPs for outbound connectivity on an ASA 5510 (although the same should work on the 5520s and up as well).  It’s important to note that this covers outbound connectivity only.  The ASA does not have built…
Get a first impression of how PRTG looks and learn how it works.   This video is a short introduction to PRTG, as an initial overview or as a quick start for new PRTG users.
This video gives you a great overview about bandwidth monitoring with SNMP and WMI with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're looking for how to monitor bandwidth using netflow or packet s…

746 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

11 Experts available now in Live!

Get 1:1 Help Now