Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people, just like you, are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
Solved

Cisco 2811 to Cisco 2911

Posted on 2010-09-21
3
1,300 Views
Last Modified: 2012-05-10
Hi there,
I have just ordered a new Cisco 2911 router.  What is the easiest way of copying and pasting all my 'running config' from 2811 to the new router 2911?  How many manual entries I have to make?  Is there a way to check all my configuration on the new router running fine while the old 2811 still ON?
Help
0
Comment
Question by:amanzoor
  • 2
3 Comments
 
LVL 34

Accepted Solution

by:
Istvan Kalmar earned 500 total points
ID: 33729159
Hi,


you need to change only the interfaces name, and all config working, if you have license:)

Best regards,
Istvan
0
 
LVL 4

Author Comment

by:amanzoor
ID: 33730792
ikalmar:
Please describe in detail, I rarely do this cisco stuff.  I will be copying the running config for the first time.  I need to understand in steps what to do.  Please explain.
Thanks  
0
 
LVL 34

Expert Comment

by:Istvan Kalmar
ID: 33871494
if you copy configs here I help you
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

It happens many times that access list (ACL) have to be applied to outgoing router interface in order to limit some traffic.This article is about how to test ACL from the router which is not very intuitive for everyone. Below scenario shows simple s…
I have seen some questions on problems with SSH/telnet access to Cisco routers that may occur despite the fact that from a PC connected to your LAN, Internet connectivity is in place and users can access Internet sites without any issues.  There are…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

837 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question