Solved

Windows 2008 Server Virtual Server

Posted on 2010-09-21
6
454 Views
Last Modified: 2012-05-10
Hi,

I noticed this error in my Server Roles "File Server" log:

While transmitting or receiving data, the server encountered a network error.  Occassional errors are expected, but large amounts of these indicate a possible error in your network configuration.  The error status code is contained within the returned data (formatted as words) and may point you towards the problem.

0000:  000040000 002C001 00000000  800007DC
0008:  000000000 C000184 00000000  00000000
0010:  000000000 0000000 0000058F

Is this something to worry about?

Cheers

0
Comment
Question by:minniejp
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
6 Comments
 
LVL 4

Accepted Solution

by:
geieea earned 500 total points
ID: 33731360
0
 
LVL 15

Expert Comment

by:vahiid
ID: 33731363
Do you have a Dell Host Server with Boardcom network cards? If you do then will be able to  resolve this by:

- Removing the current network card drives
- Installing the latest version of your network card drive from Dell's website.

Vahid

0
 
LVL 59

Expert Comment

by:Darius Ghassem
ID: 33734163
Disable Large Send Offload within the VMs on the Network Card and on the physical Server as well
0
Does Powershell have you tied up in knots?

Managing Active Directory does not always have to be complicated.  If you are spending more time trying instead of doing, then it's time to look at something else. For nearly 20 years, AD admins around the world have used one tool for day-to-day AD management: Hyena. Discover why

 

Author Comment

by:minniejp
ID: 33759838
I have removed IPv6 and updated the network card drivers....still getting this error. Dariusg, i'm not sure how to do what you have recommended...
I also wanted to add something that has got me really confused.  The server we are discussing here is a physical server with windows 2008, within an additional two virtual servers installed.

When I checked the network cards Local Area Connection 4 is enabled but has no IP address assigned....Local Area Connection 5 is also enabled with the correct IP settings.  I disabled the local area connection 4 and it brought down network access to this server and when I do a resolve on the DNS server (which is the physical box), it returns a different IP address (which i'm assuming is the IP address which has been dynamically assigned to local area connection 4..... what is going...

Cheers
0
 
LVL 59

Expert Comment

by:Darius Ghassem
ID: 33769917
Go to the properties of  the NIC click configure then Advance tab
0
 

Author Comment

by:minniejp
ID: 33906965
i'm not sure why, but I haven't seen this error again......looks like removing IPV6 eventually did it
0

Featured Post

Technology Partners: We Want Your Opinion!

We value your feedback.

Take our survey and automatically be enter to win anyone of the following:
Yeti Cooler, Amazon eGift Card, and Movie eGift Card!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Windows 2008 set profile 9 62
How are passwords stored in Active Directory 25 299
Sync home folder not working- urgent 13 57
List Boot time of several computers 4 17
I was supporting a handful of Windows 2008 (non-R2) 2 node clusters with shared quorum disks. Some had SQL 2008 installed and some were just a vendor application that we supported. For the purposes of this article it doesn’t really matter which so w…
You might have come across a situation when you have Exchange 2013 server in two different sites (Production and DR). After adding the Database copy in ECP console it displays Database copy status unknown for the DR exchange server. Issue is strange…
This tutorial will walk an individual through locating and launching the BEUtility application to properly change the service account username and\or password in situation where it may be necessary or where the password has been inadvertently change…
This tutorial will walk an individual through the steps necessary to enable the VMware\Hyper-V licensed feature of Backup Exec 2012. In addition, how to add a VMware server and configure a backup job. The first step is to acquire the necessary licen…

751 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question