Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people, just like you, are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
Solved

FAILED: Unable to reconfigure the destination virtual machine

Posted on 2010-09-22
4
7,664 Views
Last Modified: 2012-07-13
When you convert a physical Windows Server 2003 machine, to reach 95% an error of reconfiguration failed. We tried to stop SQL services, but the problem persists. When you install VMware Converter on the physical machine, to reach 98% showing a failed reconfigurción error.
We tried to format the disk arrays, with 8MB and the same problem happens.
Anyone have an idea how to fix?
Sorry for my English.
Thanks everyone!
converter-gui-5.log
vmware-converter-server-1.log
0
Comment
Question by:TechEli
  • 2
  • 2
4 Comments
 
LVL 23

Accepted Solution

by:
Luciano Patrão earned 250 total points
ID: 33742054
Hi

For database P2V better to do a cold migration and you need to do several task in the pre P2V, also post tasks after the P2V

Check this how to P2V

http://www.experts-exchange.com/Software/VMWare/A_3639-VMware-vConverter-P2V-for-Windows-Servers.html

Jail
0
 

Author Comment

by:TechEli
ID: 33767476
I was able to virtualize the C\: drive operating system, but it is impossible to virtualize the data in the drive E:\. On the drive e: contains the SQL databases. Is there a problem to virtualize SQL databases with vmware?
0
 
LVL 23

Expert Comment

by:Luciano Patrão
ID: 33767620
Hi

To P2V databases you need to stop the services. And be careful with the data if you are migrating with a hot migration.

Did you try a cold migration? For databases the best is a cold migration.

Jail
0
 

Author Comment

by:TechEli
ID: 33769195
The tests I have done both hot and cold, and the results were the same. Failed at 95%.
Migraré data and database E: \ by hand. There should be no problem.
Thank you very much for your time.
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

In this article, I will show you HOW TO: Suppress Configuration Issues and Warnings Alert displayed in Summary status for ESXi 6.5 after enabling SSH or ESXi Shell.
In this article, I show you step by step with screenshots to assist you - HOW TO: Deploy and Install the VMware vCenter Server Appliance 6.5 (VCSA 6.5), with some helpful tips along the way.
Teach the user how to delpoy the vCenter Server Appliance and how to configure its network settings Deploy OVF: Open VM console and configure networking:
This Micro Tutorial steps you through the configuration steps to configure your ESXi host Management Network settings and test the management network, ensure the host is recognized by the DNS Server, configure a new password, and the troubleshooting…

790 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question