Solved

Windows 2008 R2 - AS/400

Posted on 2010-09-23
6
1,674 Views
Last Modified: 2013-12-06
We have a network with a SBS2008 server, while Windows2008R2 and Windows2003 servers in the domain. Besides running the network in an AS/400 system.

The AD and the AS/400 are created the same user names and passwords.

Now we want Win2008R2 systems directly from an open folder on the AS/400. This works perfectly from the Windows2003 system, but from the Windows2008R2 system and also from Windows 7 systems this will not work. We have after research on the Internet already changed some settings on the Windows systems, but without effect:

- UAC is disabled
- NoLMHash = 0
- LMCompatibilityLevel = 0

On the AS/400, the following setting:
- QPWDLVL = 0

If we WIN2008R2 from a folder on the AS/400 system, the Open, we get a login screen. If we correct this login screen, enter username and password, we can open the folder. However on the Win2003 system, this works without us having to fill in this information.

In Trace we have seen that the stiff Win2008R2 systems keep sending the passwords in NTLMv2 format.

Could you tell us what settings to get it done WIN2008R2 servers also from the folder to open directly.
0
Comment
Question by:j-ware
  • 2
6 Comments
 

Author Comment

by:j-ware
ID: 33760089
Thanks
0
 
LVL 7

Accepted Solution

by:
jesaja earned 500 total points
ID: 33763651
0
 
LVL 34

Expert Comment

by:Gary Patterson
ID: 33764834
If you have an IBM Support User ID that entitles you to access protected support content, you can check out this support article:

Windows XP Prompts Repeatedly for a User ID When Mapping a Drive¿                         

This document explains why Microsoft Windows  Me/NT/2000/XP and above using NT LAN Manager Version 2 (NTLMv2)  challenge/response authentication may prompt repeatedly for an operating  system user ID and password. Although this is a Windows operating  system issue, suggestions are provided that may be helpful in resolving  the authentication issues.¿

http://www-01.ibm.com/support/docview.wss?uid=nas1174df98118c23ad886256d200058825b

Otherwise, here are some things to check:

What OS version are you running on the AS/400?  Verify that you are on a compatible iOS release and that all of the approproate PTF's are applied:

http://www-03.ibm.com/systems/i/software/netserver/releases.html

Review this IBM Support document for Windows 7, since some of these issues apply to Win2008 as well:

http://www-01.ibm.com/support/docview.wss?uid=nas15197341657f9f57e86257655005736ff

- Gary Patterson
0
 

Author Closing Comment

by:j-ware
ID: 33810845
Thanks for the solution. Works perfect
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Disabling the Directory Sync Service Account in Office 365 will stop directory synchronization from working.
Restoring deleted objects in Active Directory has been a standard feature in Active Directory for many years, yet some admins may not know what is available.
This tutorial will give a short introduction and overview of Backup Exec 2012 and how to navigate and perform basic functions. Click on the Backup Exec button in the upper left corner. From here, are global settings for the application such as conne…
This tutorial will walk an individual through the steps necessary to join and promote the first Windows Server 2012 domain controller into an Active Directory environment running on Windows Server 2008. Determine the location of the FSMO roles by lo…

786 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question