Solved

Changing Static IP Route

Posted on 2010-09-24
1
297 Views
Last Modified: 2012-05-10
I have a 2800 series router. I need to change the static ip route that is used to gain access to the internet from 1.5 to 2.5. I am not 100% sure on how to remove the current static adress and add the new one. Thanks.
0
Comment
Question by:fanman8302
1 Comment
 
LVL 24

Accepted Solution

by:
rfc1180 earned 500 total points
ID: 33756111
conf t
no ip route 0.0.0.0 0.0.0.0 192.168.1.5
ip route 0.0.0.0 0.0.0.0 192.168.2.5
exit
wr mem

If you want a more definitive command please post the output of:

show run | inc 0.0.0.0
and the IP address you want the next hop to be

Thanks
Billy
0

Featured Post

Easy, flexible multimedia distribution & control

Coming soon!  Ideal for large-scale A/V applications, ATEN's VM3200 Modular Matrix Switch is an all-in-one solution that simplifies video wall integration. Easily customize display layouts to see what you want, how you want it in 4k.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

In this tutorial I will show you with short command examples how to obtain a packet footprint of all traffic flowing thru your Juniper device running ScreenOS. I do not know the exact firmware requirement, but I think the fprofile command is availab…
Hello , This is a short article on how would you go about enabling traceoptions on a Juniper router . Traceoptions are similar to Cisco debug commands but these traceoptions are implemented in Juniper networks router . The following demonstr…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

809 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question