troubleshooting Question

Configuring Sonicwall TZ100 for MPLS/WAN/LAN

Avatar of corpdsinc
corpdsinc asked on
RoutersNetworking Hardware-Other
2 Comments1 Solution1516 ViewsLast Modified:
We are setting up a 6 site MPLS network with brand new Sonicwall TZ100 unlimited devices.  We are having problems programing the MPLS port on the optional port of the network device.  Here is what we have from the ISP:

WAN: 24.34.x.x
LAN: 192.168.1.1
MPLS: 192.168.1.2

Setting up the lan and wan port was no problem, but we can't setup the optional port for 192.168.1.2 as it is on the same subnet as the LAN ip.   Maybe the MPLS handoff is already hardcoded to 192.168.1.2 and we just need to plug it into the LAN?  Is this how MPLS is usually handed off?

thanks!
Join the community to see this answer!
Join our exclusive community to see this answer & millions of others.
Unlock 1 Answer and 2 Comments.
Join the Community
Learn from the best

Network and collaborate with thousands of CTOs, CISOs, and IT Pros rooting for you and your success.

Andrew Hancock - VMware vExpert
See if this solution works for you by signing up for a 7 day free trial.
Unlock 1 Answer and 2 Comments.
Try for 7 days

”The time we save is the biggest benefit of E-E to our team. What could take multiple guys 2 hours or more each to find is accessed in around 15 minutes on Experts Exchange.

-Mike Kapnisakis, Warner Bros