troubleshooting Question

Multiple Site-to-Site VPNs Cisco PIX 515e / Cisco 800 Series Router

Avatar of ngeorge06
ngeorge06 asked on
5 Comments2 Solutions744 ViewsLast Modified:
I need to setup a second site-to-site VPN from our Cisco PIX 515 firewall to a Cisco 851 router. We already have one site to site VPN configured this way. However, I need some help setting this up as I'm not the original admin who configured the first VPN connection.

I've reviewed the PIX config and verified the following config is present-

isakmp policy 10 authentication pre-share
isakmp policy 10 encryption 3des
isakmp policy 10 hash sha
isakmp policy 10 group 2
isakmp policy 10 lifetime 86400

My first question is, can I utilize the same isakmp policy on the PIX, or do I need to create another one just for this second site to site VPN?

I'm sure there are other things I need to review here, but this is all I've been able to dig up so far.

Join the community to see this answer!
Join our exclusive community to see this answer & millions of others.
Unlock 2 Answers and 5 Comments.
Join the Community
Learn from the best

Network and collaborate with thousands of CTOs, CISOs, and IT Pros rooting for you and your success.

Andrew Hancock - VMware vExpert
See if this solution works for you by signing up for a 7 day free trial.
Unlock 2 Answers and 5 Comments.
Try for 7 days

”The time we save is the biggest benefit of E-E to our team. What could take multiple guys 2 hours or more each to find is accessed in around 15 minutes on Experts Exchange.

-Mike Kapnisakis, Warner Bros