<div>
<a href="http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c01802766&jumpid=reg_R1002_USEN" rel="ugc nofollow">http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c01802766&jumpid=reg_R1002_USEN</a> is a more permanent fix.
</div>


http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c01802766&jumpid=reg_R1002_USEN [http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c01802766&jumpid=reg_R1002_USEN] is a more permanent fix.

<div>
No reason has been given. Formware and driver as per that doc is the most common reason for randomly rebooting Proliants.
</div>


No reason has been given. Formware and driver as per that doc is the most common reason for randomly rebooting Proliants.

<div>
<div class="content wysiwyg-content">
My company have HP ProLiant BL460c G1. Blade server error message:<br />
BMC IPMI Watchdog Timer Timeout: Action=System Power Reset.<br />
<br />
Error:<br />
Server detects that the machine freezes and then reboot but this is not freezes .<br />
<br />
This is probably a hardware problem or the firmware update solves this.<br />
I would like to know more information about this error.<br />
<br />
What's the solution?<br />
<br />
<br />
best regards<br />
bajuszp <br />
<br />
<br />
<br />
<br />
<br />
<br />

</div>
</div>


My company have HP ProLiant BL460c G1. Blade server error message:
BMC IPMI Watchdog Timer Timeout: Action=System Power Reset.

Error:
Server detects that the machine freezes and then reboot but this is not freezes .

This is probably a hardware problem or the firmware update solves this.
I would like to know more information about this error.

What's the solution?


best regards
bajuszp 








Blade server error message: BMC IPMI Watchdog Timer Timeout: Action=System Power Reset.

Servers are computing devices that are similar to desktop computers in that they have the same basic components, but are significantly different in size, configuration and purpose. Servers are usually accessed over a network, and many run unattended, without a computer monitor, input device, audio hardware or USB interfaces. Many servers do not have a graphical user interface (GUI), and are configured and managed remotely. Servers typically include hardware redundancy such as dual power supplies, RAID disk systems, and ECC memory, along with extensive pre-boot memory testing and verification. Critical components might be hot swappable, and to guard against overheating, servers might have more powerful fans or use water cooling.