troubleshooting Question

Cisco Mini-GBIC not enabled

Avatar of bcarmi
bcarmi asked on
RoutersSwitches / Hubs
5 Comments1 Solution1563 ViewsLast Modified:
Hi,
I'm missing something rather simple. I bought a few Cisco 3560 + Cisco fiber/copper mini-gbics. The non-mini-gbic ports all work as they should. The mini-gbic ports seem to be constantly down even though I ran the "no shut command on all of them, and installed the cables of course. Here is the output from  the show int command:

GigabitEthernet2/24 is down, line protocol is down (notconnect)
  Hardware is C6k 1000Mb 802.3, address is c84c.7578.2817 (bia c84c.7578.2817)
  MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec,
     reliability 255/255, txload 1/255, rxload 1/255
  Encapsulation ARPA, loopback not set
  Keepalive set (10 sec)
  ARP type: ARPA, ARP Timeout 04:00:00
  Last input never, output never, output hang never
  Last clearing of "show interface" counters never
  Input queue: 0/2000/0/0 (size/max/drops/flushes); Total output drops: 0
  Queueing strategy: fifo
  Output queue: 0/40 (size/max)
  5 minute input rate 0 bits/sec, 0 packets/sec
  5 minute output rate 0 bits/sec, 0 packets/sec
     0 packets input, 0 bytes, 0 no buffer
     Received 0 broadcasts (0 multicasts)
     0 runts, 0 giants, 0 throttles
     0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
     0 watchdog, 0 multicast, 0 pause input
     0 input packets with dribble condition detected
     0 packets output, 0 bytes, 0 underruns
     0 output errors, 0 collisions, 2 interface resets
     0 babbles, 0 late collision, 0 deferred
     0 lost carrier, 0 no carrier, 0 PAUSE output
     0 output buffer failures, 0 output buffers swapped out

so basically how do I "enable" these ports?
Thanks,
Bcarmi
Join the community to see this answer!
Join our exclusive community to see this answer & millions of others.
Unlock 1 Answer and 5 Comments.
Join the Community
Learn from the best

Network and collaborate with thousands of CTOs, CISOs, and IT Pros rooting for you and your success.

Andrew Hancock - VMware vExpert
See if this solution works for you by signing up for a 7 day free trial.
Unlock 1 Answer and 5 Comments.
Try for 7 days

”The time we save is the biggest benefit of E-E to our team. What could take multiple guys 2 hours or more each to find is accessed in around 15 minutes on Experts Exchange.

-Mike Kapnisakis, Warner Bros