Link to home
Start Free TrialLog in
Avatar of WyleHou
WyleHou

asked on

SCVMM 2008R2 How to Add NIC

We are running System Center Virutal Machine Manager 2008R2 and have a problem with NIC's.  I have three NIC on the host server and only two show up on the SCVMM.  So both of my VM's are running through one NIC and the Host is running through the other.

All three NIC's show online and connected to the domain with internet access, so they are all three working.  I just can't see where within the console to add the new NIC to be utilized by the second VM.  VM-A and VM-B are both using one NIC with the HOST using the other.  So the third, which i want VM-B to use, is not showing up anywhere within the SCVMM.

Thanks in advance for your assistance
ASKER CERTIFIED SOLUTION
Avatar of msmamji
msmamji
Flag of Pakistan image

Link to home
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Start Free Trial
Avatar of Suliman Abu Kharroub
From Hyperv manager--> actions tab--> Virtual network manager--> add a new network adapter.
Avatar of WyleHou
WyleHou

ASKER

Have you tried removing the host from the VMM and then adding it again? - This worked.  Thanks!!