Replace Failed disk with Solaris Disk Suite?
Do you detach all of the subdisks from the failed disk? Even those without errors? Thanks!
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Did you break the mirrors before replacing the disk, please read the instructions (links) in my previous comment carefully.
Is the disk the same type as the old one? can you see the new disk in the OBP command, eg:
probe-scsi-all (for scsi disk)
probe-ide (for IDE disks)
if the disk is not the same model, you might need to perform a re-configure boot.
Is the disk the same type as the old one? can you see the new disk in the OBP command, eg:
probe-scsi-all (for scsi disk)
probe-ide (for IDE disks)
if the disk is not the same model, you might need to perform a re-configure boot.
Please provide the steps used to replace the disk.
Also, you should not need to break mirrors if the disk is failed.
Also, you should not need to break mirrors if the disk is failed.
ASKER
Thank you Yuzh!
ASKER
The disk was replaced, but the system didn’t recognize it and rebuild after the reboot.
bash-3.00# /usr/sbin/metadb
flags first blk block count
a m p luo 16 8192 /dev/dsk/c0t0d0s7
a p luo 8208 8192 /dev/dsk/c0t0d0s7
a p luo 16400 8192 /dev/dsk/c0t0d0s7
bash-3.00# /usr/sbin/metastat
d3: Mirror
Submirror 0: d13
State: Okay
Submirror 1: d23
State: Needs maintenance
Pass: 1
Read option: roundrobin (default)
Write option: parallel (default)
Size: 18042048 blocks (8.6 GB)
d13: Submirror of d3
State: Okay
Size: 18042048 blocks (8.6 GB)
Stripe 0:
Device Start Block Dbase State Reloc Hot Spare
c0t0d0s3 0 No Okay Yes
d23: Submirror of d3
State: Needs maintenance
Invoke: metareplace d3 c0t1d0s3 <new device>
Size: 18042048 blocks (8.6 GB)
Stripe 0:
Device Start Block Dbase State Reloc Hot Spare
c0t1d0s3 0 No Maintenance Yes
d2: Mirror
Submirror 0: d12
State: Okay
Submirror 1: d22
State: Needs maintenance
Pass: 1
Read option: roundrobin (default)
Write option: parallel (default)
Size: 34120128 blocks (16 GB)
d12: Submirror of d2
State: Okay
Size: 34120128 blocks (16 GB)
Stripe 0:
Device Start Block Dbase State Reloc Hot Spare
c0t0d0s5 0 No Okay Yes
d22: Submirror of d2
State: Needs maintenance
Invoke: metareplace d2 c0t1d0s5 <new device>
Size: 34120128 blocks (16 GB)
Stripe 0:
Device Start Block Dbase State Reloc Hot Spare
c0t1d0s5 0 No Maintenance Yes
d1: Mirror
Submirror 0: d11
State: Okay
Submirror 1: d21
State: Needs maintenance
Pass: 1
Read option: roundrobin (default)
Write option: parallel (default)
Size: 24625920 blocks (11 GB)
d11: Submirror of d1
State: Okay
Size: 24625920 blocks (11 GB)
Stripe 0:
Device Start Block Dbase State Reloc Hot Spare
c0t0d0s1 0 No Okay Yes
d21: Submirror of d1
State: Needs maintenance
Invoke: metareplace d1 c0t1d0s1 <new device>
Size: 24625920 blocks (11 GB)
Stripe 0:
Device Start Block Dbase State Reloc Hot Spare
c0t1d0s1 0 No Maintenance Yes
d0: Mirror
Submirror 0: d10
State: Okay
Pass: 1
Read option: roundrobin (default)
Write option: parallel (default)
Size: 16678464 blocks (8.0 GB)
d10: Submirror of d0
State: Okay
Size: 16678464 blocks (8.0 GB)
Stripe 0:
Device Start Block Dbase State Reloc Hot Spare
c0t0d0s0 0 No Okay Yes
d4: Mirror
Submirror 0: d14
State: Okay
Pass: 1
Read option: roundrobin (default)
Write option: parallel (default)
Size: 48997440 blocks (23 GB)
d14: Submirror of d4
State: Okay
Size: 48997440 blocks (23 GB)
Stripe 0:
Device Start Block Dbase State Reloc Hot Spare
c0t0d0s6 0 No Okay Yes
d20: Concat/Stripe
Size: 16678464 blocks (8.0 GB)
Stripe 0:
Device Start Block Dbase Reloc
c0t1d0s0 0 No Yes
Device Relocation Information:
Device Reloc Device ID
c0t0d0 Yes id1,sd@SSEAGATE_ST973401LS