Link to home
Start Free TrialLog in
Avatar of techinfo_bpm
techinfo_bpm

asked on

Wyse USB Firmware tool generate img file and not rsp file

Hi!

I have 2 Wyse thin clients and both are on Wyse Thin OS (WTOS). They have different versions (one is 6.2 and other 6.3).

I want to put the 6.3 version of the firmware on the one that have 6.2. I've found the Wyse USB Firmware tool 1.10 and I had no problems to make a copy of the firmware.

Now I want to update (push) the firmware and when I follow the procedure in the guide and on the software, it ask me to select a RSP or ID2 file. But the copy (pull) operation generated me a IMG file, so I can't continue...

I tried to compress the image to see if the compressed image is a RSP file but it's still a IMG file. I've searched on WYSE's website and the only thing that I've found that is useful is to buy a service contract and after that download a firmware from their site.

This the link to download the software and the guide to use it : http://www.wyse.com/serviceandsupport/support/dlOraFW.asp?which=102&model=USB%20Firmware%20Tool(Wyse%20Imaging%20Tool)
ASKER CERTIFIED SOLUTION
Avatar of techinfo_bpm
techinfo_bpm

Link to home
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Start Free Trial
Avatar of techinfo_bpm
techinfo_bpm

ASKER

I received my solution from the forum of the manufacturer. I think that keeping the topic here may help other users.