where is the cabin filter in a 1993 Honda Accord LX and how do you change it?

where is the cabin filter in a 1993 Honda Accord LX and how do you change it?
Who is Participating?
I wear a lot of hats...

"The solutions and answers provided on Experts Exchange have been extremely helpful to me over the last few years. I wear a lot of hats - Developer, Database Administrator, Help Desk, etc., so I know a lot of things but not a lot about one thing. Experts Exchange gives me answers from people who do know a lot about one thing, in a easy to use platform." -Todd S.

I don't believe the 1993 model has a cabin filter. There is not one listed at RockAuto for it either.

Experts Exchange Solution brought to you by

Your issues matter to us.

Facing a tech roadblock? Get the help and guidance you need from experienced professionals who care. Ask your question anytime, anywhere, with no hassle.

Start your 7-day free trial
If its equiped with one, they are behind the glove box.
See this replacement guide:
afrpaAuthor Commented:
well then if my air is smelling like mold how do i fix that?
Well, it could be a couple of things. The first would be to check the condensation drain for the evaporator core. This is the drain that usually drips water under the car when the A/C is on. This will generally be a hose connected to the evaporator ducting in the passenger floorboard behind the glove box. You will want to make sure this isn't plugged.

We used to get the mold smell complaint from time to time when I was a Ford tech. Thing is, the evaporator itself can begin to smell like mold even if all is draining well. We had a kit issued by Ford which was nothing more than a spray that would kill mold and was used by spraying it into the interior air supply under the dash. We would set the system to recirculate with the system set to full cold and the compressor unplugged, and then spray the solution into the air intake under the dash on the passenger side. We would unplug the compressor under the hood so the evaporator would stay dry except for the solution being sprayed through it. With an import though, you probably have an "A/C" button on the dash to disengage the compressor so that you don't have to disconnect the power to the compressor clutch. You could also use a recirculation/vent mode if available. After spraying it, we would shut it all down and let it sit for a period of time to do its thing.

Without access to a specific solution, I might try something like Lysol through the evaporator although I would look for an unscented version.
It's more than this solution.Get answers and train to solve all your tech problems - anytime, anywhere.Try it for free Edge Out The Competitionfor your dream job with proven skills and certifications.Get started today Stand Outas the employee with proven skills.Start learning today for free Move Your Career Forwardwith certification training in the latest technologies.Start your trial today

From novice to tech pro — start learning today.