Solved

Cisco Cataclyst Express 500 reboots every 10 minutes..

Posted on 2010-11-08
4
375 Views
Last Modified: 2012-05-10
Good day,

I havea Catalyst switch (POE) that has started to reboot every 10-15 mins since today. I tried to find the problem all day but I could not..   I am no way a Cisco Experts. and not very familiar with CLI.

Anyone knows about this kind of problem?

Cheers,
0
Comment
Question by:maxalarie
  • 2
4 Comments
 
LVL 11

Assisted Solution

by:diprajbasu
diprajbasu earned 250 total points
ID: 34091476
The switch may have a corrupt or missing
system image. Contact the SMB TAC for
assistance.

cs-support@cisco.com
0
 
LVL 1

Assisted Solution

by:chiheb
chiheb earned 250 total points
ID: 34091725
Hi,


Tape the following commande in CLI mode and send the result "show debug"
0
 
LVL 2

Accepted Solution

by:
maxalarie earned 0 total points
ID: 34093377
I think i have found the problem..

It was gettting spammed by a Ip Phone. As soon as I disconnceted the Ip Phone from the switch, the traffic leds went  from crazy flashing speed, to a more normal flashing speed.  It stopped rebooting afterthat.

I did not have the  problem since i disconnected the device.  The traffic was so intense I could not even connect to the Device Manager.
0
 
LVL 2

Author Closing Comment

by:maxalarie
ID: 34299420
MErci
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
stacking switches 2 65
Ping Through ASA Firewall 6 46
managing a small network 6 97
Switched virtual interface on layer 2 switch 2 35
I see many questions here on Experts Exchange regarding switch port configurations and trunks. This article is meant for beginners in the subject to help to get basic knowledge about Virtual Local Area Network (VLAN (http://en.wikipedia.org/wiki/Vir…
I eventually solved a perplexing problem setting up telnet for a new switch.  I installed a new Cisco WS-03560X-24P switch connected to an existing Cisco 4506 running a WS-X4013-10GE Sup II-Plus. After configuring vlans and trunking,  I could no…
In an interesting question (https://www.experts-exchange.com/questions/29008360/) here at Experts Exchange, a member asked how to split a single image into multiple images. The primary usage for this is to place many photographs on a flatbed scanner…

791 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question