Solved

TCP Out-Of-Order

Posted on 2010-11-09
2
787 Views
Last Modified: 2012-05-10
People are complaining about the performance of the LAN. As I monitored the network with wireshark I found alot of Out-Of-Order TCP packets. But not just from one source but from many sources to different destinations. Could this be the problem? Could it be the switch? Need some help debugging. Switch is cisco catalyst 2980G
0
Comment
Question by:socom1985
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
2 Comments
 
LVL 1

Accepted Solution

by:
jsd9 earned 500 total points
ID: 34091841
Most performance issues on a switched network indicate a speed/duplex mismatch.  I see you have a Gigabit switch, however some of your connections may be Fast Ethernet.  If you have a Fast Ethernet connections, I would recommend that you look to see if you are using auto-negotiation.  Auto-negotiation on Fast Ethernet does not work well in most situations.  If you are able to login to the switch and look at the port counters, see if there are any interface errors.  I always recommend to my customers to hard code their Fast Ethernet connections to 100 Full duplex, as auto-negotiation on Fast Ethernet can often cause performance issues with dropped traffic.  This is both on the switch side and the connecting device side.  
0
 
LVL 1

Author Closing Comment

by:socom1985
ID: 34092802
That was the problem. Thanks..
0

Featured Post

How our DevOps Teams Maximize Uptime

Our Dev teams are like yours. They’re continually cranking out code for new features/bugs fixes, testing, deploying, responding to production monitoring events and more. It’s complex. So, we thought you’d like to see what’s working for us. Read the use case whitepaper.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Introduction Many times we come across a slowness or instability between two hosts, and almost always we blame the poor networking guys, just because they're an easy target.  Sometimes we forget that other factors including disk bottlenecks, CPU …
Load balancing is the method of dividing the total amount of work performed by one computer between two or more computers. Its aim is to get more work done in the same amount of time, ensuring that all the users get served faster.
Get a first impression of how PRTG looks and learn how it works.   This video is a short introduction to PRTG, as an initial overview or as a quick start for new PRTG users.
Here's a very brief overview of the methods PRTG Network Monitor (https://www.paessler.com/prtg) offers for monitoring bandwidth, to help you decide which methods you´d like to investigate in more detail.  The methods are covered in more detail in o…

749 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question