How to connect two routers via serial interface

Hi

Is it for cisco labs? Buy a cable with one end as DTE (data terminal equipment) and the other end DCE

http://cgi.ebay.co.uk/1Meter-Cisco-Back-Back-DB60-Crossover-Cable-DCE-DTE-/330494096219?pt=LH_DefaultDomain_3&hash=item4cf2fbb35b

Search for DCE DTE cable on ebay and in most cases D60 will do check the router series and buy the right one. Good Luck

Hope this helps

Hi,

you need: CAB-X21 MT and CAB-X21 FC cable

http://www.cisco.com/en/US/products/hw/routers/ps133/products_tech_note09186a00801f5d8f.shtml

So basically I need to buy a CAB-X21 MT and a CAB-X21 FC cable

To connect the two routers

sorry I didnt see the specification of the wic cards

You need a cable with one end DTE and the other DCE look at the type ofwith one end connecting to wic 1t and the other end to wic 2t

http://cgi.ebay.co.uk/CISCO-WIC-2T-DB60-DTE-SS-DCE-CABLE-/180576727861?pt=UK_Computing_Networking_SM&hash=item2a0b363335

look at this i think this is the one you might need

"

So basically I need to buy a CAB-X21 MT and a CAB-X21 FC cable
 are these physically compatible because 1 end is DB15 i am not sure

This question has been classified as abandoned and is being closed as part of the Cleanup Program. See my comment at the end of the question for more details.