Solved

Removing iMagePASS-C1 from Canon C3200 Printer

Posted on 2010-11-10
2
1,815 Views
Last Modified: 2013-12-01
We have an older Canon irC3200 with a iMagePASS fiery attached.  The hard drive has failed on the fiery and would like to print directly to the printer and bypass the fiery.
The fiery has been removed as well as it's interface card and the printer has been configured with the proper ip and network settings.  I can ping the printer, but it continues to show "Offline" on our print server.

Any ideas on how to accomplish this?
0
Comment
Question by:Dennis_Atkins
2 Comments
 
LVL 9

Accepted Solution

by:
jrtec earned 500 total points
ID: 34117145
Hi,
I  personally dont know that machine, but I do know machines that can have external print controllers, like a fiery, that cannot print without the fiery even if they have a network card. Others need an optional internal printe controller if not using the external print controller (fiery, creo, ...).
From the information I was able to get regarding that machine you have two possibilities to use it as a printer, both are optional.
1 - Color Network Multi-PDL-A1
2 - imagePASS-C1 (fiery)
So I think that to use it without fiery you need the Color Network Multi-PDL-A1.
Do you know if the machine as that controller?
Maybe the best way to find out is asking your canon service provider.
0
 

Author Closing Comment

by:Dennis_Atkins
ID: 34197290
Good response.  Confirmed what I was supecting.
0

Featured Post

How your wiki can always stay up-to-date

Quip doubles as a “living” wiki and a project management tool that evolves with your organization. As you finish projects in Quip, the work remains, easily accessible to all team members, new and old.
- Increase transparency
- Onboard new hires faster
- Access from mobile/offline

Join & Write a Comment

Suggested Solutions

Data center, now-a-days, is referred as the home of all the advanced technologies. In-fact, most of the businesses are now establishing their entire organizational structure around the IT capabilities.
ADCs have gained traction within the last decade, largely due to increased demand for legacy load balancing appliances to handle more advanced application delivery requirements and improve application performance.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
This video gives you a great overview about bandwidth monitoring with SNMP and WMI with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're looking for how to monitor bandwidth using netflow or packet s…

760 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

23 Experts available now in Live!

Get 1:1 Help Now