Solved

SBS 2008 RAS VPN DHCP giving wrong DNS address

Posted on 2010-11-11
1
2,148 Views
Last Modified: 2012-05-10
Hi

I have just migrated sbs 2003 to sbs 2003. the only issue i have is that rras is handing out the address of the old box as DNS server. all is well onsite, DHCP gives out the correct address but when connecting via vpn / rras we get the wron address.

I cant see anything in DHCP or rras pointing to this address. DHCP services are configured on the same box as the RRAS services (SBS 2008)

Any ideas guys?

Thanks

Intechnical
0
Comment
Question by:Intechnical
1 Comment
 
LVL 2

Accepted Solution

by:
rdan2 earned 500 total points
ID: 34117380
Check that RRAS is using the right NIC to obtain the DNS Settings.

In RRAS, right click the server -> properties -> IP tab

Down the bottom of the IP tab there is a drop down where you look what adapter is being used to pick up the DNS address from.  Is this set to the right NIC, and does that NIC have the right DNS settings?
0

Featured Post

Revamp Your Training Process

Drastically shorten your training time with WalkMe's advanced online training solution that Guides your trainees to action.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Scenario:  You do full backups to a internal hard drive in either product (SBS or Server 2008).  All goes well for a very long time.  One day, backups begin to fail with a message that the disk is full.  Your disk contains many, many more backups th…
I recently attended Cisco Live! in Las Vegas, a conference that boasted over 28,000 techies in attendance, and a week of hands-on learning hosted by a solid partner with which Concerto goes to market.  Every year, Cisco displays cutting-edge technol…
This tutorial will walk an individual through the steps necessary to configure their installation of BackupExec 2012 to use network shared disk space. Verify that the path to the shared storage is valid and that data can be written to that location:…
This tutorial will show how to configure a new Backup Exec 2012 server and move an existing database to that server with the use of the BEUtility. Install Backup Exec 2012 on the new server and apply all of the latest hotfixes and service packs. The…

730 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question