How to configuer pppoe with ADSL and ASA

How can I configure pppoe using ADSL Router and ASA5510, I'm having three different interfaces; users(LAN1), servers (LAN2) , outside (public ip) and management.

ykb007
ykb007Asked:
Who is Participating?
 
Ernie BeekExpertCommented:
So you managed to upgrade the ASA?

About the disabeling, are you sure you are logged on at the highest (non restrictive) level? -> level 15 acces.
0
 
Ernie BeekExpertCommented:
Assuming you want the ASA to use PPPoE: http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080ab7ce9.shtml

Otherwise, could you give some more detail?
0
 
ykb007Author Commented:
Hi,

I'm using the adsm, when I try to configure the interface for pppoe I don't see (use pppoe). The outside interface is configured for vpn site-to-site.

ykb007
0
WEBINAR: 10 Easy Ways to Lose a Password

Join us on June 27th at 8 am PDT to learn about the methods that hackers use to lift real, working credentials from even the most security-savvy employees. We'll cover the importance of multi-factor authentication and how these solutions can better protect your business!

 
Ernie BeekExpertCommented:
What version do you have (asa OS & asdm)?
0
 
ykb007Author Commented:
Cisco Adaptive Security Appliance Software Version 7.0(8)
Device Manager Version 5.0(8)

0
 
Ernie BeekExpertCommented:
I think you might need to upgrade your software. I'm not able to check right now from what version pppoe is supported, but i'll let you know.
0
 
ykb007Author Commented:
Ok. I'll try the command instead, does that have anything to do with IOS version. Also, can I use the managment interface for pppoe.

0
 
Ernie BeekExpertCommented:
I've checked, you will need version 8.x for the asa to be able to act as an PPPoE client... (So doesn't matter if you use asdm our CLI, in your version the option isn't there yet).

You can use  the managment interface for that if you remove the 'management only' option from it, it will then act as a regular interface.
0
 
Ernie BeekExpertCommented:
Also keep in mind that from version 8.3 NAT has been completely changed. So you might want to start with 8.2x before having to worry about a completely changed nat implementation. If you do upgrade to 8.3x though, your current nat statements will be automatically converted.

http://informationsecuritytips.com/2010/04/nat-configuration-example-in-cisco-asa-version-8-3/
0
 
ykb007Author Commented:
I  tried to uncheck the management only from the management interface but it's disabled. How can I disable it,

0
 
ykb007Author Commented:
I didn't upgrade the ASA yet.

I'm logging with level 15 admin, and I can't uncheck the management option.

0
 
Ernie BeekExpertCommented:
So did you succeed? Adn how did you do it?
0
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

All Courses

From novice to tech pro — start learning today.