?
Solved

show mls qos command question

Posted on 2010-11-15
3
Medium Priority
?
504 Views
Last Modified: 2012-06-27
I was working with a TAC engineer that did a ping test from one of our sites, to another site.
He did a ping with dscp ef (he used a hex value, i cant remember which one for ef, anyone know)

And on the receiving end, he did a "show mls qos" with some other commands. The command showed , ef, af etc with counters. Anyone know which sho command he used?  And which hex value he used to ping ef
0
Comment
Question by:orus
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 2
3 Comments
 
LVL 21

Accepted Solution

by:
from_exp earned 1000 total points
ID: 34143642
please take a look at this link:
https://supportforums.cisco.com/thread/202079
0
 

Author Comment

by:orus
ID: 34145958
thanks. Now what about a show mls command to see the different DSCP classes on the other end?
0
 

Author Closing Comment

by:orus
ID: 34152212
Never heard back
0

Featured Post

Optimum High-Definition Video Viewing and Control

The ATEN VM0404HA 4x4 4K HDMI Matrix Switch supports 4K resolutions of UHD (3840 x 2160) and DCI (4096 x 2160) with refresh rates of 30 Hz (4:4:4) and 60 Hz (4:2:0). It is ideal for applications where the routing of 4K digital signals is required.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

The Cisco RV042 router is a popular small network interfacing device that is often used as an internet gateway. Network administrators need to get at the management interface to make settings, change passwords, etc. This access is generally done usi…
There are two basic ways to configure a static route for Cisco IOS devices. I've written this article to highlight a case study comparing the configuration of a static route using the next-hop IP and the configuration of a static route using an outg…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Suggested Courses

777 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question