Solved

P to V From DMZ to inside network

Posted on 2010-11-16
1
444 Views
Last Modified: 2012-05-10
I want to P to V a system in my DMZ just to have a copy of it. It sits in DMZ and my ESX host sits on private side. Do i just open ports 902 and 443 between the DMZ server and the ESX host through firewall to do P to V then remove rules when done? Any other ports to worry about?
0
Comment
Question by:Millface
1 Comment
 
LVL 5

Accepted Solution

by:
ianmellor earned 500 total points
ID: 34147038
Hi,
Below is the link that will help you. It has all the ports you need listed.
kb.vmware.com/kb/1010056

Hope this helps.
0

Featured Post

Portable, direct connect server access

The ATEN CV211 connects a laptop directly to any server allowing you instant access to perform data maintenance and local operations, for quick troubleshooting, updating, service and repair.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

HOW TO: Install and Configure VMware vSphere Hypervisor 6.5 (ESXi 6.5), Step by Step Tutorial with screenshots. From Download, Checking Media, to Completed Installation.
In this article, I will show you HOW TO: Suppress Configuration Issues and Warnings Alert displayed in Summary status for ESXi 6.5 after enabling SSH or ESXi Shell.
Teach the user how to configure vSphere clusters to support the VMware FT feature Open vSphere Web Client: Verify vSphere HA is enabled: Verify netowrking for vMotion and FT Logging is in place or create it: Turn On FT for a virtual machine: Verify …
Both in life and business – not all partnerships are created equal. As the demand for cloud services increases, so do the number of self-proclaimed cloud partners. Asking the right questions up front in the partnership, will enable both parties …

809 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question