Solved

Linux VM Internet Connection

Posted on 2010-11-17
2
618 Views
Last Modified: 2012-05-10
So I have a server that is running Citrix Xenserver 5.5, I installed CentOS 5.4 as a VM on the Xenserver, everything seems to have gone well on the install of the OS, but I have no internet connection.

The Xenserver has an internal address of 172.xx.yy.10 the VM has an internal ip of 172.xx.yy.11

The server goes into a Cisco 3750 catalyst w/ VLANs, to a PIX 515e firewall, to a Cisco 2950 switch (layer 2), finally to a DSL modem.

If I plug a computer directly into the 3750 I have an internet connection off of one of my windows machines...

I'm relatively new to Linux and feel like I am blindly poking around. Any help would be appreciated.
0
Comment
Question by:JBober14
2 Comments
 
LVL 4

Accepted Solution

by:
thunderhead earned 500 total points
ID: 34156740
type route at a command/terminal prompt to see what the default gateway is.

You may need to change this, or set it up.

have a look here:

http://www.cyberciti.biz/faq/howto-rhel-fedora-linux-setup-default-gateway/
0
 

Author Closing Comment

by:JBober14
ID: 34160019
The gateway was not properly set, the link provided showed the way...
0

Featured Post

Network it in WD Red

There's an industry-leading WD Red drive for every compatible NAS system to help fulfill your data storage needs. With drives up to 8TB, WD Red offers a wide array of solutions for customers looking to build the biggest, best-performing NAS storage solution.  

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

In this tutorial I will show you with short command examples how to obtain a packet footprint of all traffic flowing thru your Juniper device running ScreenOS. I do not know the exact firmware requirement, but I think the fprofile command is availab…
Load balancing is the method of dividing the total amount of work performed by one computer between two or more computers. Its aim is to get more work done in the same amount of time, ensuring that all the users get served faster.
Here's a very brief overview of the methods PRTG Network Monitor (https://www.paessler.com/prtg) offers for monitoring bandwidth, to help you decide which methods you´d like to investigate in more detail.  The methods are covered in more detail in o…
This video gives you a great overview about bandwidth monitoring with SNMP and WMI with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're looking for how to monitor bandwidth using netflow or packet s…

895 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

19 Experts available now in Live!

Get 1:1 Help Now