Solved

Windows 2008 Multihomed Server DC DNS Issue

Posted on 2010-11-17
4
1,525 Views
Last Modified: 2012-05-10
We have a Windows 2008 that is multihomed.  One nic is on the LAN, two NICS are iSCSI Nics that connect to our SAN.  All Nics have static IP adresses.  This 2008 server is a DC and does DNS.  The iSCSI Nics keep registering themselves in DNS automatically.  We've unchecked the option in the Advanced settings under TCP/IP, we've also added the registry key 'DisableDynamicUpdate' for the iSCSI adapters.  The server is fully patched and has been rebooted after these changes, but it keeps registering the iSCSI adapters in DNS.  We need it to only register the LAN adapter.
0
Comment
Question by:purplecables
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 2
  • 2
4 Comments
 
LVL 59

Accepted Solution

by:
Darius Ghassem earned 500 total points
ID: 34157113
Is this server your Domain Controller? Not really good idea to have your DC or DNS server running multihomed this causing these types of issues.

Go through this link

http://technet.microsoft.com/en-us/library/cc759481(WS.10).aspx

Go into your Network Connections click Advance Settings Make sure your primary NIC is listed first.
0
 

Author Comment

by:purplecables
ID: 34157234
The primary LAN adapter is listed first.  I did restrict the DNS server to only listen on the LAN IP address so I will see if this helps.
0
 

Author Closing Comment

by:purplecables
ID: 34159195
What fixed it was selecting the IP's the DNS server should listen on...Thank You!
0

Featured Post

U.S. Department of Agriculture and Acronis Access

With the new era of mobile computing, smartphones and tablets, wireless communications and cloud services, the USDA sought to take advantage of a mobilized workforce and the blurring lines between personal and corporate computing resources.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

INTRODUCTION The purpose of this document is to demonstrate the Installation and configuration of the Data Protection Manager product. Note that this demonstration was prepared on the basis of Windows OS is 2008 R2 and DPM 2010. DATA PROTECTI…
Ever notice how you can't use a new drive in Windows without having Windows assigning a Disk Signature?  Ever have a signature collision problem (especially with Virtual Machines?)  This article is intended to help you understand what's going on and…
This tutorial will walk an individual through the steps necessary to enable the VMware\Hyper-V licensed feature of Backup Exec 2012. In addition, how to add a VMware server and configure a backup job. The first step is to acquire the necessary licen…
This tutorial will walk an individual through the steps necessary to join and promote the first Windows Server 2012 domain controller into an Active Directory environment running on Windows Server 2008. Determine the location of the FSMO roles by lo…

734 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question