Solved

Nortel Contivity 1100 Configuration with LAN interface only

Posted on 2010-11-17
5
1,300 Views
Last Modified: 2012-05-10
Hi All,

I have one Nortel Contivity 1100 and i want to use this for VPN purpose only. I am using another firewall for security and VPN but i want to use Nortel as well for secondary VPN also.

How should i configure the Nortel contivity 1100 so that i can connect this to my existing switch and configure just to serve the purpose of VPN.

Can you please guide me the setp by step procedure to configure the VPN. I have one spare Public IP which i can NAT with the local interface for Nortel contivity.
0
Comment
Question by:sanjeevkmrs
  • 3
  • 2
5 Comments
 
LVL 11

Accepted Solution

by:
diprajbasu earned 500 total points
ID: 34161755
0
 
LVL 11

Expert Comment

by:diprajbasu
ID: 34161773
0
 

Author Comment

by:sanjeevkmrs
ID: 34161873
Hi,

I have already gone thru all these PDF but didnt get the configuration to configure the VPN by using LAN interface IP.

Do you have any specific doc related to this only.
0
 

Author Comment

by:sanjeevkmrs
ID: 34170576
Hi All,
Can you please help me on this.
0
 

Author Closing Comment

by:sanjeevkmrs
ID: 34328332
thanks
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Secure VPN Connection terminated locally by the Client.  Reason 442: Failed to enable Virtual Adapter. If you receive this error on Windows 8 or Windows 8.1 while trying to connect with the Cisco VPN Client then the solution is a simple registry f…
This is an article about my experiences with remote access to my clients (so that I may serve them) and eventually to my home office system via Radmin Remote Control. I have been using remote access for over 10 years and have been improving my metho…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

776 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question