Solved

Sharp MX-5500N printer setup for MacBook

Posted on 2010-11-17
2
633 Views
Last Modified: 2012-06-21
Hi;

My user using MacBook Pro and I have installed the printer driver of Sharp MX-5500N for her, the driver I used is "MX2300_7001_Mac105_1200.zip" which was downloaded from www.sharp.ca site.

The installation of driver is ok and she can print, howerver the print out was go to the output tray on the right hand side, not in the Saddle Stitch Finish try.  What can I do to fix it?

Please see the picture for reference.
Now.docx
0
Comment
Question by:KANEWONG
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
2 Comments
 
LVL 43

Accepted Solution

by:
Davis McCarn earned 250 total points
ID: 34164394
First, the proper drivers can be found here: http://www.sharpusa.com/ForBusiness/DocumentSystems/MFPsPrinters/MX5500N.aspx

Second, with most of these Sharps, there is a method to either read the printers extra options in that driver or they can be added manually so you have the correct configuration of the printer.
0
 
LVL 1

Author Comment

by:KANEWONG
ID: 34165057
Thanks, this is the right driver.
0

Featured Post

Don't miss ATEN at NAB Show April 24-27!

Visit ATEN at NAB Show to learn how our "Seamlessly Entertaining" solutions deliver fast, precise video streaming without delays for the broadcasting and media environment. ATEN will showcase its 16x16 Modular Matrix Switch (VM1600) and KVM Over IP Solution (KE6900 series).

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

If you use a Brother DCP 130C or similar Brother printer, at some point you might encounter the following problem: after you change the ink cartridge, the printer displays an "ink empty" message. Sometimes you just need to follow the instructions…
When I recently replaced my image transfer kit on my office HP color laserjet 5550dn printer, I had a slight problem.  The left bracket that holds the transfer kit got stuck in the upright locked position instead of being at a 45 degree angle facing…
In an interesting question (https://www.experts-exchange.com/questions/29008360/) here at Experts Exchange, a member asked how to split a single image into multiple images. The primary usage for this is to place many photographs on a flatbed scanner…

749 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question