Solved

Best personal/small business router for VOIP (SPA-941)

Posted on 2010-11-17
3
531 Views
Last Modified: 2012-05-10
Hello,

I would like a recommendation for the best personal/small business router for a network of Linksys' SPA-941 phones. With my current router, the phones cut out for about 30 seconds throughout a call.

Thanks!

Drew
0
Comment
Question by:drew17
3 Comments
 
LVL 5

Accepted Solution

by:
Armenio earned 250 total points
ID: 34161297
Drayteck vigor  range tehy come in many different feature sets find the one that best suits your needs.

try the vigor ippbx 2820
0
 
LVL 5

Assisted Solution

by:q2q
q2q earned 250 total points
ID: 34162242
I would also recommend the 2820 ippbx. Although if you already have a voip server / providere you could go with a regular 2820.
It would also be worth creating a Quality of service so that the phones dont loose their connection even if someone is doing a big download. Or better still get a 2nd adsl line (not too expensive) as both the 2820 and 2820 ippbx has 2 * wan so your regular traffic could be sent over the other wan.
0
 

Author Closing Comment

by:drew17
ID: 34187962
Thanks!
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

We've been using the Cisco/Linksys RV042 for years as: - an internet Gateway - a site-to-site VPN device - a leased line site-to-site subnet-to-subnet interface (And, here I'm assuming that any RV0xx behaves the same way as an RV042.  So that's …
Almost all Internet protocol telephones have built-in switches at the back that allow you to connect your personal computer to one port and use the other port to connect your phone to to a Cisco switch.   Why we need to connect the PC to the pho…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

773 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question