Solved

Web connection attempts re-directing to 8.15.7.117 and 63.251.179.13

Posted on 2010-11-18
5
1,306 Views
Last Modified: 2012-05-10
When attempting to connect to Web sites hosted at our site the connections fail and doing nslookups returns the IPs 8.15.7.117 and 63.251.179.13.  These are Verizon hosts and obviously not the correct addresses.  My addresses are entered correctly in DNS and the Web sites are accessible locally.  However, from outside our network this re-direct is happening.  Any insights into this?  The problem occured after an attempt to cut-over to another ISP.  That cut-over had to be scrapped when a partner of ours wasn't ready with their changes.  All DNS entries and firewall configs were set back to their original status, but this problem still cropped up.  Anyone experience something similar?
0
Comment
Question by:swiftadmin
  • 2
  • 2
5 Comments
 
LVL 2

Expert Comment

by:ckiral
ID: 34165080
Please check if your dns server addresses are correct on registrar records.
http://whois.domaintools.com/yourdomain.com 
0
 
LVL 6

Expert Comment

by:HAVARD7979
ID: 34165931
who is the resgistar for the domain name.  you need to set the NS!, NS2 and A record with them
0
 

Accepted Solution

by:
swiftadmin earned 0 total points
ID: 34165998
The registrar is Go Daddy.  Thought initially this was a DNS issue, but the Verizon IPs I had returned were just because I was using Verizon's service and they give you their DNS hosts when they can't properly resolve a name.  To resolve the problem we used another available IP for our Web site and associated that new address with our firewall's NAT policies.  That worked.  Not sure why the old address wouldn't work for the re-direct but there you have it....

Thanks for the feedback!
0
 
LVL 6

Expert Comment

by:HAVARD7979
ID: 34166090
why not just set the A record to the verizon IP number and set up a DMZ on  your outer to the machine with the website?
0
 

Author Closing Comment

by:swiftadmin
ID: 34399111
Solution ultimately required knowledge of local firewall NAT policies.
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Running Guacamole on port 80 5 207
Problem to go to Web page 2 118
Public IP Address Amazon Servers 2 56
app server have enough resources... 2 40
A web service (http://en.wikipedia.org/wiki/Web_service) is a software related technology that facilitates machine-to-machine interaction over a network. This article helps beginners in creating and consuming a web service using the ColdFusion Ma…
Introduction This article explores the design of a cache system that can improve the performance of a web site or web application.  The assumption is that the web site has many more “read” operations than “write” operations (this is commonly the ca…
Windows 10 is mostly good. However the one thing that annoys me is how many clicks you have to do to dial a VPN connection. You have to go to settings from the start menu, (2 clicks), Network and Internet (1 click), Click VPN (another click) then fi…
Two types of users will appreciate AOMEI Backupper Pro: 1 - Those with PCIe drives (and haven't found cloning software that works on them). 2 - Those who want a fast clone of their boot drive (no re-boots needed) and it can clone your drive wh…

808 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question