Solved

Group Policy Error Event ID: 1058

Posted on 2010-11-18
1
2,469 Views
Last Modified: 2012-08-13
Guys, how do i resolve this issue:

Log Name:      System
Source:        Microsoft-Windows-GroupPolicy
Date:          11/18/2010 10:58:26 AM
Event ID:      1058
Task Category: None
Level:         Error
Keywords:      
User:          P_DOMAIN\ahester
Computer:      ROC-406905L.petersons.net
Description:
The processing of Group Policy failed. Windows attempted to read the file \\petersons.net\SysVol\petersons.net\Policies\{B69C7D90-EC41-482F-9910-E69D8C44389C}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
  <System>
    <Provider Name="Microsoft-Windows-GroupPolicy" Guid="{AEA1B4FA-97D1-45F2-A64C-4D69FFFD92C9}" />
    <EventID>1058</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>1</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2010-11-18T15:58:26.098573900Z" />
    <EventRecordID>111947</EventRecordID>
    <Correlation ActivityID="{6D4ACC36-F25D-46C4-B68E-27DD47CB18A5}" />
    <Execution ProcessID="628" ThreadID="2080" />
    <Channel>System</Channel>
    <Computer>ROC-406905L.petersons.net</Computer>
    <Security UserID="S-1-5-21-575632381-533874821-1540833222-10408" />
  </System>
  <EventData>
    <Data Name="SupportInfo1">4</Data>
    <Data Name="SupportInfo2">816</Data>
    <Data Name="ProcessingMode">2</Data>
    <Data Name="ProcessingTimeInMilliseconds">1029</Data>
    <Data Name="ErrorCode">3</Data>
    <Data Name="ErrorDescription">The system cannot find the path specified. </Data>
    <Data Name="DCName">roc-dc-01.petersons.net</Data>
    <Data Name="GPOCNName">cn={B69C7D90-EC41-482F-9910-E69D8C44389C},cn=policies,cn=system,DC=petersons,DC=net</Data>
    <Data Name="FilePath">\\petersons.net\SysVol\petersons.net\Policies\{B69C7D90-EC41-482F-9910-E69D8C44389C}\gpt.ini</Data>
  </EventData>
</Event>
0
Comment
Question by:jbm1
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
1 Comment
 
LVL 10

Accepted Solution

by:
jramsier earned 500 total points
ID: 34165911
Below was taken from Microsoft site:
http://technet.microsoft.com/en-us/library/cc727259(WS.10).aspx

Error code 3 (The system cannot find the path specified)
This error code usually indicates that the client computer cannot find the path specified in the event.

This failure may be caused by the DFS Client not running. Refer to the Microsoft Knowledge Base article about how to resolve this failure (http://support.microsoft.com/kb/314494).

To test client connectivity to the domain controller's sysvol:

1.Identify the domain controller used by computer. The domain controller name is logged in the details of the error event.
2.Identify if failure happened during user or computer processing. For user policy processing, the User field of the event will show a valid user name; for computer policy processing, the User field will show "SYSTEM".
3.Compose full network path to the gpt.ini as \\<dcName>\SYSVOL\<domain>\Policies\<guid>\gpt.ini where <dcName> is the name of the domain controller, <domain> is the name of the domain, and <guid> is the GUID of the policy folder. All of this information appears in the event.
4.Verify you can read gpt.ini using the full network path obtained in the previous step. To do this, launch a command window and type <file_path>, where <file_path> is the path constructed in the previous step, and press ENTER. NOTE: You must launch this command as the user or computer whose credentials previously failed.
5.Follow Network troubleshooting procedures to diagnose the problem further (http://go.microsoft.com/fwlink/?LinkId=92706).
0

Featured Post

PeopleSoft Has Never Been Easier

PeopleSoft Adoption Made Smooth & Simple!

On-The-Job Training Is made Intuitive & Easy With WalkMe's On-Screen Guidance Tool.  Claim Your Free WalkMe Account Now

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

MS Outlook is a world-class email client application that is mainly used for e-communication globally.  In this article, we will discuss the basic idea about MS Outlook, its advanced features, and types of MS Outlook File formats.
Unified and professional email signatures help maintain a consistent company brand image to the outside world. This article shows how to create an email signature in Exchange Server 2010 using a transport rule and how to overcome native limitations …
To show how to create a transport rule in Exchange 2013. We show this process by using the Exchange Admin Center. Log into Exchange Admin Center.: First we need to log into the Exchange Admin Center. Navigate to the Mail Flow >> Rules tab.:  To cr…
This video demonstrates how to sync Microsoft Exchange Public Folders with smartphones using CodeTwo Exchange Sync and Exchange ActiveSync. To learn more about CodeTwo Exchange Sync and download the free trial, go to: http://www.codetwo.com/excha…
Suggested Courses

626 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question