Solved

Windows Server 2008 R2 Hyper-V time sync issues

Posted on 2010-11-18
3
1,539 Views
Last Modified: 2012-05-10
Hi
I have a server 2008 R2 running Hyper-V role and 3 virtual servers, two of which are DC. DC1 runs the PDC and I have used it to sync time servers.  But, I noticed the time is running 2 minutes slow.  This is the third time I have had to re-sync the time. I have disabled time synchronization on integration services on all servers.
Thanks for your help
John
0
Comment
Question by:geocleojohn
  • 2
3 Comments
 
LVL 6

Assisted Solution

by:thiagotietze
thiagotietze earned 250 total points
ID: 34170345
Hum, I've had the same problem as you, but, disabling the time sync, at integration services and running w32tm /resync /rediscover in all DCs presenting the issue, have just fixed.

Where your DC is getting the correct time? A external Time server at the internet?

What in the result of your w32tm /monitor command (please, hide your dc names heh...)???
0
 

Accepted Solution

by:
geocleojohn earned 0 total points
ID: 34172583
Hi

I did resync  rediscover  and it synced the time.  It is getting time from the internet. An external server.

I attach result of /rediscover.

Thanks
John
W32monitor.txt
0
 

Author Closing Comment

by:geocleojohn
ID: 34384142
figured it out
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

I have been working as System Administrators since 2003. I recently started working as a FreeLancer and was amazed to find out that very few people are taking full advantage of their Windows Server Machines. Microsoft Windows Server comes with so…
Restoring deleted objects in Active Directory has been a standard feature in Active Directory for many years, yet some admins may not know what is available.
This tutorial will walk an individual through the steps necessary to configure their installation of BackupExec 2012 to use network shared disk space. Verify that the path to the shared storage is valid and that data can be written to that location:…
This tutorial will walk an individual through configuring a drive on a Windows Server 2008 to perform shadow copies in order to quickly recover deleted files and folders. Click on Start and then select Computer to view the available drives on the se…

920 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

12 Experts available now in Live!

Get 1:1 Help Now