Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people, just like you, are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
Solved

Freedom9 Freeguard 100 Port Forwarding

Posted on 2010-11-19
2
1,191 Views
1 Endorsement
Last Modified: 2012-05-10
We have aquired a new client that is running the freeguard 100.  We need to port forward 3389 to the server asap.  I have reset the router...we have tried everything.
I have created a custom service,  then a rule to map the WAN1 port to INTERNAL to the ip.  Nothing.

Anyone have experience with this device??
1
Comment
Question by:j-teksolutions
2 Comments
 
LVL 22

Accepted Solution

by:
Matt V earned 500 total points
ID: 34404095
It looks like you need to create a virtual IP Mapping.

The steps with pictures are available on page 176 in this manual:
http://www.freedom9.com/cms/index.php?option=com_rokdownloads&view=file&task=download&id=81%3Afreeguard100administrationguide&Itemid=29
0
 

Author Closing Comment

by:j-teksolutions
ID: 34453837
Excellent thanks !
0

Featured Post

Connect further...control easier

With the ATEN CE624, you can now enjoy a high-quality visual experience powered by HDBaseT technology and the convenience of a single Cat6 cable to transmit uncompressed video with zero latency and multi-streaming for dual-view applications where remote access is required.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

We've been using the Cisco/Linksys RV042 for years as: - an internet Gateway - a site-to-site VPN device - a leased line site-to-site subnet-to-subnet interface (And, here I'm assuming that any RV0xx behaves the same way as an RV042.  So that's …
Tired of waiting for your show or movie to load?  Are buffering issues a constant problem with your internet connection?  Check this article out to see if these simple adjustments are the solution for you.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

808 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question