Solved

Upgrading image on 4507r switch

Posted on 2010-11-19
1
367 Views
Last Modified: 2012-05-10
What is the proper location to copy a new image to a 4507r switch? Bootflash?
I am upgrading one here this Sunday.  

Any special considerations/advice?

Thanks
0
Comment
Question by:orus
1 Comment
 
LVL 17

Accepted Solution

by:
Kvistofta earned 500 total points
ID: 34176617
The image is transfered with the copy command with either ftp or tftp.

copy ftp: bootflash:

The most important things to verify first:
1) read the release notes for the new image.
2) Check system requirements. Does the new image fit on bootflash? Do you have enough ram? Is it compatible with all line cards and modules installed?

Good luck!

/Kvistofta
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
What type of checksum is used for Cisco/Linksys RV router configurations? 18 59
IP Calculator 10 53
VIRL IP adress 3 57
Etherchannel trunking 10 40
If your business is like most, chances are you still need to maintain a fax infrastructure for your staff. It’s hard to believe that a communication technology that was thriving in the mid-80s could still be an essential part of your team’s modern I…
For many of us, the  holiday season kindles the natural urge to give back to our friends, family members and communities. While it's easy for friends to notice the impact of such deeds, understanding the contributions of businesses and enterprises i…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
This video gives you a great overview about bandwidth monitoring with SNMP and WMI with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're looking for how to monitor bandwidth using netflow or packet s…

932 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

10 Experts available now in Live!

Get 1:1 Help Now