Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people, just like you, are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
Solved

GNS issue

Posted on 2010-11-19
1
328 Views
Last Modified: 2012-05-10
I having a problem connecting router R0 and router R1 via serial connection, how do I resolve?  There is the error I receive when attempting setup the serial connections between them and also the config of the WIC's on each.

Any ideas?
gns-error-1.bmp
0
Comment
Question by:OCwaste2
1 Comment
 
LVL 4

Accepted Solution

by:
ciscocert earned 500 total points
ID: 34179656
Hi ,
right click the router go to configure --> slots then there will be a drop down menu there you select NM-4t click apply and ok. Now you have added four serial interface to the router. You should connect the serial interface of one router to the serial interface of the other.  you cannot add serial interface to the 1700 series as there is no slots in it.
0

Featured Post

Connect further...control easier

With the ATEN CE624, you can now enjoy a high-quality visual experience powered by HDBaseT technology and the convenience of a single Cat6 cable to transmit uncompressed video with zero latency and multi-streaming for dual-view applications where remote access is required.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Provisioning vcpu for VM (cisco virl) 4 62
NAT not working on trunk 6 37
Use packet tracer to verify anyconnect VPN 11 56
Cisco IPSec lan to lan tunnel - encryption domain. 3 35
Data center, now-a-days, is referred as the home of all the advanced technologies. In-fact, most of the businesses are now establishing their entire organizational structure around the IT capabilities.
Shadow IT is coming out of the shadows as more businesses are choosing cloud-based applications. It is now a multi-cloud world for most organizations. Simultaneously, most businesses have yet to consolidate with one cloud provider or define an offic…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

791 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question