Solved

drive faulted in emc ax4

Posted on 2010-11-22
1
1,816 Views
Last Modified: 2012-05-10
How do I replace a faulted drive in a emc ax4-5i?
0
Comment
Question by:Matt Pessolano
1 Comment
 
LVL 6

Accepted Solution

by:
jvr006 earned 500 total points
ID: 34189303
If you already have talked to EMC and recieved the replacement drive, just remove the failed, and plug the new drive in. The AX4 will rebuild the RAID and disable the hotspare.
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

In this article, I show you step by step with screenshots to assist you - HOW TO: Deploy and Install the VMware vCenter Server Appliance 6.5 (VCSA 6.5), with some helpful tips along the way.
This article aims to explain the working of CircularLogArchiver. This tool was designed to solve the buildup of log file in cases where systems do not support circular logging or where circular logging is not enabled
This video teaches viewers how to encrypt an external drive that requires a password to read and edit the drive. All tasks are done in Disk Utility. Plug in the external drive you wish to encrypt: Make sure all previous data on the drive has been …
This tutorial will walk an individual through the process of installing the necessary services and then configuring a Windows Server 2012 system as an iSCSI target. To install the necessary roles, go to Server Manager, and select Add Roles and Featu…

809 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question