?
Solved

split bandwidth betewwn ISP's

Posted on 2010-11-22
5
Medium Priority
?
436 Views
Last Modified: 2012-05-10
Hello All,

We’re looking into splitting the bandwidth on our network so that  the internet traffic goes out on a Cable or DSL connection and all of our IPSec vpn traffic to goes over our Sprint T1 line.  I would like to configure our current Watchguard Firebox X1000 to do this.  Can anyone help with this?  I'll need some detailed instruction.  Thanks in advance.

Alicia
0
Comment
Question by:Alicia Perillo
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 3
  • 2
5 Comments
 
LVL 32

Accepted Solution

by:
dpk_wal earned 2000 total points
ID: 34194220
Please have look at policy based routing; read below:
http://watchguard.custhelp.com/app/answers/detail/a_id/2387/kw/policy%20based%20routing

Please let know if you need more info.

Thank you.
0
 

Author Comment

by:Alicia Perillo
ID: 34197750
dpk_wal

Thanks for the response.  The link is helpful as I will be upgrading to a XTM device in early 2011.

Do you know if there is a way to do this or something similar with a Watchfuard X1000?
0
 
LVL 32

Expert Comment

by:dpk_wal
ID: 34202270
Which version of software are you running on your X1000; PBR was added in some release before 10.x so need to check if your software supports PBR.

Thank you.
0
 

Author Closing Comment

by:Alicia Perillo
ID: 34230782
Dpk_wal,

Thanks for your help and quick responses.

Alicka
0
 
LVL 32

Expert Comment

by:dpk_wal
ID: 34236026
Happy to be of assistance.
0

Featured Post

Portable, direct connect server access

The ATEN CV211 connects a laptop directly to any server allowing you instant access to perform data maintenance and local operations, for quick troubleshooting, updating, service and repair.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Use of TCL script on Cisco devices:  - create file and merge it with running configuration to apply configuration changes
WARNING:   If you follow the instructions here, you will wipe out your VTP and VLAN configurations.  Make sure you have backed up your switch!!! I recently had some issues with a few low-end Cisco routers (RV325) and I opened a case with Cisco TA…
NetCrunch network monitor is a highly extensive platform for network monitoring and alert generation. In this video you'll see a live demo of NetCrunch with most notable features explained in a walk-through manner. You'll also get to know the philos…
Monitoring a network: how to monitor network services and why? Michael Kulchisky, MCSE, MCSA, MCP, VTSP, VSP, CCSP outlines the philosophy behind service monitoring and why a handshake validation is critical in network monitoring. Software utilized …
Suggested Courses
Course of the Month10 days, 16 hours left to enroll

770 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question